Drill bit Proline 92060 — metal, Ø20 mm, length 600 mm, 1 pc

Proline 92060 — metal drill bit, Ø20 mm, length 600 mm, single piece. This long-reach drill bit is designed for drilling metal in applications that require extended depth and reach. The solid construction suits use in hand drills and drill presses for maintenance, fabrication and workshop tasks where a single long-length cutting tool is preferred. The bit delivers centered drilling and stable performance when creating through-holes or deep pilot holes in various metal workpieces.

Advantages

The Proline 92060 features a 20 mm diameter and a 600 mm overall length that allow access to deep or hard-to-reach drilling points without the need for extensions or multiple shorter bits. Its design supports accurate centered drilling and reduced load during cutting, improving stability and control in both manual and machine-assisted drilling. Supplied as a single piece, the bit is ready for immediate use in standard chucks compatible with long drill shanks.

Suitable for

• Drilling deep holes in steel and other metals
• Maintenance and repair tasks requiring extended reach
• Fabrication and workshop operations with drill presses or hand-held drills

Key specifications

• Diameter: 20 mm
• Overall length: 600 mm
• Material target: metal
• Package quantity: 1 piece

How to use

Select a drill or drill press with a chuck capable of securely holding the long shank. Mark the drilling point and, if necessary, create a center punch indentation to prevent wandering. Start drilling at a low speed to establish the hole, then increase speed appropriate to the metal type while applying steady, even pressure. Use cutting fluid or lubricant suitable for metalworking to reduce heat and extend tool life. After completing the hole, clear chips and inspect the drill bit for wear or damage before further use.

Usage recommendations

For best results with the Proline 92060, use a drill or press with adequate rigidity and a chuck that supports long shanks. Keep cutting speed moderate for larger diameter metal drilling, apply appropriate cutting fluid, and periodically withdraw the bit to remove chips and prevent clogging.