Table saw Proxxon 27070 — bench/tabletop circular saw, 7000 RPM, 220–240 V, 6 kg

Proxxon 27070 is a compact bench/tabletop circular saw designed for precise, repeatable cutting in small workshops and hobby environments. Rated for 220–240 V AC and running at an idle speed of 7000 RPM, this saw combines a stable die-cast aluminium table with a low-noise DC special motor and toothed belt drive to deliver consistent performance for model making, light carpentry and detailed DIY tasks. The unit weighs approximately 6 kg and includes a tungsten-tipped saw blade suitable for cutting a variety of materials, while micro-adjustable stops and a tilting, height-adjustable blade add flexibility for angled and fine-depth cuts.

Advantages

The saw’s load-bearing components and plane-milled table are manufactured from die-cast aluminium for stable alignment and long-term accuracy. A DC special motor with Optibelt toothed belts reduces noise and vibration, while ball-bearing support on the blade shaft improves rotational stability. The micro-adjustable longitudinal stop allows increments smaller than 0.1 mm after coarse adjustment, supporting high-precision work. The height-adjustable and 45° tiltable saw blade enables bevel cuts and double mitres when used with the angle stop. Included accessories such as a tungsten-tipped 80 x 1.6 x 10 mm blade, a workpiece pusher and a non-slotted ABS sawing gap cover facilitate safe, tight-tolerance cutting.

Suitable for

• Fine mechanics and model making
• Mould construction and toy manufacture
• Architectural model building and model carpentry
• Light woodworking, cutting thin panels and trim
• Cutting plastics, Plexiglas, glass-fibre reinforced sheets and non-ferrous metals

Key specifications

• Operating voltage: 220–240 V AC
• Idle speed: 7000 RPM
• Net weight: approximately 6 kg
• Table material: die-cast aluminium, plane-milled
• Drive: DC special motor with toothed belt
• Blade: tungsten-tipped circular blade, 80 x 1.6 x 10 mm, 24 teeth
• Blade adjustment: height adjustable and tiltable to 45°
• Precision stop: micro-adjustable longitudinal stop with finer-than-0.1 mm correction
• Additional safety/accessory features: workpiece pusher, non-slotted ABS sawing gap cover

How to use

Place the Proxxon 27070 on a stable, level work surface and connect to a compatible 220–240 V AC supply. Secure the workpiece and set the desired cutting depth using the height adjustment, then angle the blade up to 45° if a bevel or double mitre is required. Use the micro-adjustable longitudinal stop to set accurate lengths; make coarse adjustment first and refine using the fine adjustment screw to achieve sub-0.1 mm corrections. Always use the workpiece pusher when feeding small or narrow pieces and position the non-slotted gap cover to maintain minimal clearance between blade and table for precision cuts.

Usage recommendations

For best results, select an appropriate blade for the material being cut and clamp or support panels to prevent splintering. Feed workpieces at a steady, moderate rate to avoid overloading the motor; allow the DC motor to reach full speed before beginning each cut. Wear suitable personal protective equipment and follow local safety regulations when operating the saw.