Circular saw blade Proxxon 28735 — replacement blade for small tabletop and plunge saws

Proxxon 28735 is a compact circular saw blade designed as a replacement cutting tool for small tabletop and plunge saws. With a diameter of 85 mm, a cutting width of 0.7 mm and a 10 mm arbor bore, this blade is intended for precision trimming, fine crosscuts and detail work on hard, brittle materials. The D100 layer and tooth design are optimized for clean cuts in ceramics, porcelain, tiles and stone, making the blade suitable for model-making, small renovation tasks and workshops that require a narrow, accurate cutting profile.

Advantages

The small diameter and narrow kerf reduce material waste and allow for controlled, low-vibration cuts. The blade’s construction and D100 layer deliver improved durability and smoother edges when cutting brittle materials such as ceramics and porcelain. Its 10 mm arbor fits compact saw spindles commonly used in tabletop and plunge saws, and the thin 0.7 mm width enables precise trimming and detailed work where standard larger blades would be impractical.

Suitable for

• Precision trimming of ceramic and porcelain tiles
• Cutting small stone samples and thin tiles
• Model-making and detailed woodworking involving hard materials
• Compact tabletop and plunge saws with 10 mm arbor
• Small renovation tasks requiring narrow kerf and accurate cuts

Key specifications

• Diameter: 85 mm
• Cutting width (kerf): 0.7 mm
• Arbor bore: 10 mm
• Coating / layer: D100
• Recommended materials: ceramics, porcelain, tiles, stone, printed circuit (PC) cards

How to use

Install the blade on a compatible small tabletop or plunge saw ensuring the arbor and flange are clean and the blade seats flat against the flange. Tighten the arbor nut to the manufacturer’s torque specification and verify correct rotation direction before powering the saw. For brittle materials such as ceramics and porcelain, use steady feed rates and avoid excessive side pressure; allow the blade to cut at its natural pace. Use appropriate supporting fixtures or clamps to secure small workpieces and maintain even support along the cut to prevent chipping.

Usage recommendations

Wear eye protection, dust mask and hearing protection when cutting. Use water cooling or reduced feed speed if recommended by your saw manufacturer to minimize heat and dust when cutting tiles or stone. Inspect the blade before each use for cracks or damage and replace if any defects are found. Keep the blade clean from residue to maintain cutting performance.