Sander accessory Proxxon 29064 — sanding attachment, 1 piece

Proxxon 29064 is a single-piece sanding attachment designed as a replacement or supplementary accessory for compatible Proxxon rotary tools. Intended for wood processing and model-making, it is suitable for surface preparation, smoothing and finishing tasks on wood and glass fibre reinforced synthetics. The attachment is sized for shafts of 3.2 mm and is intended to operate at speeds between 5,000 and 20,000 rpm. The cutter material is extremely sharp, allows controlled material removal without excessive force, and is easy to clean.

Advantages

The sanding attachment is highly durable and provides precise removal of material when working along or against the grain. Its tungsten-carbide style cutting surface retains sharpness for repeated use and is compatible with a variety of soft to medium materials including rubber, plastic foam and silicone. Designed for compact rotary tools, the accessory is simple to fit and replace and performs reliably at recommended speeds.

Suitable for

• Model-making and detailed wood shaping
• Surface preparation and smoothing of wood and glass fibre reinforced synthetics
• Cleaning and refining contours on hobby and workshop projects
• Working with rubber, foam and silicone for trim and shaping tasks

Key specifications

• Intended material: wood and glass fibre reinforced synthetics; also suitable for rubber, plastic foam and silicone
• Recommended speed range: 5,000–20,000 rpm
• Shaft diameter: 3.2 mm
• Construction: sharp, wear-resistant cutting surface for controlled material removal
• Pack quantity: single piece

How to use

Fit the sanding attachment onto a compatible rotary tool with a 3.2 mm shaft and secure it according to the tool manufacturer’s instructions. Start the tool at a lower speed within the recommended 5,000–20,000 rpm range and increase speed as needed for smoother action. Apply light, even pressure and work along or against the grain depending on the required finish. Periodically stop to inspect the workpiece and remove debris from the attachment to maintain cutting effectiveness.

Usage recommendations

Not suitable for use on metals. For safe operation, use appropriate eye and respiratory protection and secure small workpieces with a clamp or vice. Clean the attachment as needed; the cutting surface can be cleaned to remove clogging. Observe the rotary tool manufacturer’s safety guidelines and do not exceed the recommended speed range.