Filament Prusa PLA 1.75 mm 1 kg – Prusa – Orange

Prusa PLA filament in orange, 1.75 mm diameter on a 1 kg spool is a standard PLA bioplastic designed for FDM/FFF 3D printers. It provides good dimensional stability, low warping and straightforward printing behavior, making it suitable for rapid prototyping, visual models and everyday functional prints where standard PLA performance is acceptable. The orange colour delivers consistent pigmentation for visible parts and decorative objects.

Advantages

This Prusa PLA filament offers reliable feeding and extrusion on most 1.75 mm direct-drive and Bowden setups, with low tendency to stringing and minimal shrinkage during cooling. Its formulation is easy to print at common PLA temperatures, producing consistent layer adhesion and surface finish. The 1 kg spool balances print volume and storage convenience, and the vivid orange pigment helps achieve uniform colour across multi-part prints.

Suitable for

• Prototyping and concept models
• Decorative objects and coloured components
• Educational projects and classroom printing
• Low-stress functional parts and fixtures

Key specifications

• Filament material: polylactic acid (PLA) bioplastic
• Diameter: 1.75 mm
• Spool weight: 1 kg
• Colour: orange
• Compatibility: FDM/FFF 3D printers supporting 1.75 mm filament

How to use

Load the 1.75 mm Prusa PLA filament into your printer according to the manufacturer's instructions. Typical printing temperatures for PLA are in the range recommended by common FDM printers; start with a nozzle temperature around 190–220 °C and a heated bed if available at 20–60 °C or use an unheated bed with appropriate adhesion aids. Calibrate extrusion multiplier and print speed to match your printer and desired surface quality. Allow printed parts to cool gradually to reduce the risk of deformation.

Usage recommendations

Store the filament in a dry environment or sealed with desiccant to maintain printability. For best results, use standard PLA printing settings and perform small test prints when changing brand or colour to fine-tune retraction and temperature parameters.