Speaker cable PSSO 3022793K 4×4 mm 10 m

Speaker cable PSSO 3022793K 4×4 mm 10 m is a two-conductor audio cable designed for transmitting speaker-level signals over medium to long runs. The cable features two insulated conductors with a combined cross-sectional arrangement that provides low resistance and reduced signal loss, making it suitable for both home audio and professional installations. Its 10 m length offers convenience for connecting amplifier outputs to wall-mounted or remotely placed loudspeakers without needing additional joins.

Advantages

The cable provides a balanced combination of flexibility and conductor area to support reliable sound reproduction with minimal attenuation. Insulation around each conductor helps reduce crosstalk and protects against short circuits, while the construction minimizes impedance for clearer audio at typical speaker frequencies. The 4×4 mm cross-section supports higher current delivery compared with thinner speaker cables, enabling stable performance with a range of speaker impedances and power levels.

Suitable for

• Home stereo and multi-room audio speaker connections
• AV setups in living rooms, home theaters and small commercial spaces
• Permanent wiring behind walls or in conduits where a 10 m run is required
• Connecting amplifiers to bookshelf, floorstanding or in-wall speakers

Key specifications

• Length: 10 m
• Conductor arrangement: two conductors
• Cross-sectional area: 4×4 mm (per conductor grouping as specified)
• Designed use: speaker-level audio signal transmission
• Insulation: individual conductor insulation for protection and reduced interference
• Flexibility: suitable for routing through cavities and conduits

How to use

Strip a suitable length of insulation from each conductor end and attach to speaker terminals or amplifier binding posts, observing correct polarity to maintain phase integrity. For runs through walls or conduits, ensure the cable routing complies with local building codes and avoid tight bends that could damage the conductor. Secure the cable along its route with appropriate clips or fasteners to prevent movement and wear, and test the system at low volume before normal operation to confirm correct connections and sound quality.

Usage recommendations

For best results, match the cable cross-section and length to speaker impedance and amplifier power; keep run lengths as short as practical to minimize loss, and avoid running speaker cable parallel to mains wiring to reduce potential interference.