Power cable PSSO 30235001 3x1.5 mm², 3 m length, PSSO

Power cable PSSO 30235001 is a three-core mains lead with a conductor cross-section of 1.5 mm² and a total length of 3 meters. It provides standard live, neutral and earth wiring in a single flexible cable designed for supplying power to household equipment and small electrical devices. The cable is intended for applications where a short, robust flexible connection between appliance and fixed mains is required.

Advantages

The cable combines a 3x1.5 mm² conductor configuration with a 3 m length to balance current capacity and reach for typical domestic and light-commercial appliances. Its flexible construction allows easier routing and connection in confined spaces while maintaining the required conductor cross-section for common 10–16 A circuits. The inclusion of an earth conductor supports safe earthing of equipment that requires protective grounding.

Suitable for

• Connection of household appliances such as fans, small heaters and kitchen equipment
• Replacement or extension leads for portable electrical devices with compatible terminals
• Temporary wiring in workshops, trade fairs or office equipment setups
• Applications requiring a short flexible power lead with earth protection

Key specifications

• Number of conductors: 3 (live, neutral, earth)
• Conductor cross-section: 1.5 mm² per conductor
• Overall length: 3 m
• Construction: flexible mains cable for fixed and semi-flexible connections
• Typical current rating: suitable for standard 10–16 A circuits depending on installation conditions

How to use

Before installation, ensure the cable is compatible with the appliance and that the supply is switched off. Strip the outer sheath and individual conductors to the required length, taking care not to damage conductor strands. Connect the brown (live), blue (neutral) and green/yellow (earth) conductors to the corresponding terminals of the appliance or terminal block according to local wiring conventions. Secure strain relief where the cable enters the equipment to prevent mechanical stress on the terminations. After connections are made, verify continuity and correct polarity with appropriate test equipment before applying mains voltage.

Usage recommendations

Use this cable in dry, indoor environments and avoid routing it across sharp edges or hot surfaces. For permanent fixed installations, follow applicable national wiring regulations and, if necessary, use conduit or additional protection. If the appliance requires a different cross-section or longer reach, select a cable with appropriate electrical and mechanical characteristics.