Power cable PSSO 30235002 3x1.5 mm 5 m — mains lead for electrical devices

Power cable PSSO 30235002 3x1.5 mm 5 m is a mains lead intended for connecting electrical devices to household and light-commercial power sources. The cable has three conductors with a cross-sectional area of 1.5 mm² each and a total length of 5 metres, providing sufficient reach for many indoor installations, repair tasks and temporary power connections. It is designed for fixed or portable appliances that require a 1.5 mm² conductor size and compliant connection to the mains.

Advantages

The three-core construction delivers reliable current distribution for single-phase appliances while the 5 m length increases installation flexibility without additional extensions. With a standardized conductor cross-section of 1.5 mm², the cable suits a range of typical electrical loads and minimizes voltage drop across moderate distances. The insulated conductors and outer sheath offer mechanical protection and basic resistance to abrasion during normal indoor use.

Suitable for

• Connecting household appliances such as mixers, lamps and small power tools where 1.5 mm² conductors are required
• Temporary power connections in workshops, garages and renovation sites
• Replacements for worn mains leads on compatible devices
• Indoor installations where a 5 m reach from the power outlet is needed

Key specifications

• Number of conductors: 3 cores
• Conductor cross-section: 1.5 mm² per core
• Length: 5 metres
• Intended use: mains lead for indoor electrical devices
• Insulation: insulated individual conductors with protective outer sheath

How to use

Cut the cable to the required length only if necessary and strip the outer sheath and conductor insulation according to local electrical standards. Connect the conductors to the appliance and mains plug or terminal block following the correct colour coding and polarity for your region. Ensure secure mechanical clamping at entry points and check that insulation is intact before powering the device. Installation and termination should be performed by a competent person or licensed electrician when required by local regulations.

Usage recommendations

Use this mains lead for indoor applications only; do not expose it to prolonged moisture, direct sunlight or mechanical stresses beyond normal handling. Verify that the 1.5 mm² conductor size is appropriate for the device's rated current and that protective devices (fuses, circuit breakers) in the supply circuit are correctly rated. If the cable shows visible damage, replace it rather than attempting repairs.