PowerCon cable PSSO 3023503J 3x1.5 mm, 0.5 m power connector cable

PowerCon cable PSSO 3023503J 3x1.5 mm, 0.5 m power connector cable is a short mains power lead designed for devices using PowerCon connectors. The cable features three conductors with a cross-section of 1.5 mm² and a total length of 0.5 m, providing a compact, locked connection for reliable power delivery in professional audio, lighting and stage equipment setups.

Advantages

The cable combines a secure, locking PowerCon connector interface with a three-core conductor layout rated at 1.5 mm² per core, ensuring stable current flow for typical stage and installation equipment. Its 0.5 m length reduces excess cabling in rack-mounted systems and short power runs while maintaining a fixed, vibration-resistant connection. The compact construction simplifies cable management and reduces trip hazards in confined setups.

Suitable for

• Powering rack-mounted audio amplifiers and signal processors with PowerCon input/output
• Connecting lighting fixtures and dimmer packs in short runs on stage
• Temporary power links between equipment in studios and rehearsal rooms
• Portable rigs where a secure, locked mains connection is required

Key specifications

• Conductor count: 3 cores
• Conductor cross-section: 1.5 mm² per core
• Cable length: 0.5 m
• Connector type: PowerCon locking power connector
• Intended use: mains power connections for audio, lighting and stage equipment

How to use

Inspect connectors and cable for visible damage before use. Insert the PowerCon connector into the matching PowerCon socket on the device and engage the locking mechanism according to the connector design until it clicks or locks securely. Ensure the connected equipment is switched off when making or breaking connections. Route the cable to avoid sharp bends, heat sources and mechanical strain. When disconnecting, unlock the connector and withdraw it straight out to avoid stressing the cable terminations.

Usage recommendations

Use this short PowerCon cable where a secure, locked mains connection is needed over a short distance; avoid using it for long-distance runs or where greater conductor cross-section is required for high current loads. Regularly check connectors for wear and replace the cable if protective jackets or connector housings are damaged.