Waterproof diving housing Puluz for DJI Osmo Pocket 3, depth 45 m, model PU967T

The Puluz PU967T waterproof diving housing is designed specifically for the DJI Osmo Pocket 3 to enable reliable underwater filming down to 45 meters. Constructed from a rigid polycarbonate body with a clear tempered glass front port, the housing preserves image clarity while protecting the camera from water, moisture, dust, sand and impacts. Seals and a secure locking mechanism maintain watertight integrity, and external control buttons allow operation of camera functions while submerged. The kit includes the waterproof case, a base with quick-release buckle, a mounting screw and an anti-fog film to reduce condensation during dives.

Advantages

The hard-case polycarbonate shell provides robust mechanical protection from knocks and abrasion while maintaining buoyancy characteristics suitable for water activities. The tempered glass lens offers high light transmission for minimal image degradation and the external controls are engineered for precise operation underwater. Rated to 45 m depth, the housing expands shooting possibilities from snorkeling and pool sessions to recreational and professional diving without exposing the camera to water damage.

Suitable for

• Underwater filming during recreational diving and snorkeling
• Action sports on water: surfing, paddleboarding, rafting
• Pool and coastal photography where splash protection is needed
• Outdoor shoots in rainy or dusty conditions where additional sealing is required

Key specifications

• Compatibility: DJI Osmo Pocket 3
• Maximum depth rating: 45 meters
• Housing material: polycarbonate (PC)
• Front port: tempered glass with >95% light transmission
• Closure: watertight sealing with locking mechanism
• Controls: external mechanical buttons for underwater operation
• Included accessories: base with quick-release buckle, mounting screw, anti-fog film

How to use

Before inserting the DJI Osmo Pocket 3, check the sealing O-rings and anti-fog film for cleanliness and correct placement. Open the housing, position the camera inside so the lens aligns with the tempered glass port, then close and engage the locking mechanism until it is fully secured. Verify the seals visually and perform a short shallow-water test before deep dives. Use the external buttons to operate camera functions underwater and avoid excessive force when pressing controls. Rinse the housing with fresh water after each saltwater use and allow it to dry before storage.

Usage recommendations

To maintain watertight performance, rinse the housing in fresh water after every saltwater dive, inspect and lightly lubricate O-rings periodically with a manufacturer-approved lubricant, and replace the anti-fog film when worn. Perform a leak test at shallow depth before each dive and avoid exposing the housing to sharp impacts or extreme temperatures.