DisplayPort 1.2 active cable PYTHON GC-M0200 4K@60Hz 10m, white, nylon braid

The PYTHON GC-M0200 active DisplayPort 1.2 cable is a 10-metre, white, nylon-braided connection solution engineered to carry 4K (4096x2160) video at 60Hz between source devices and displays. Designed with an integrated active signal booster, this cable supports long-distance digital video transmission while maintaining signal integrity for high-resolution content. The durable nylon braid provides mechanical protection and flexible routing for professional and home installations.

Advantages

This active DisplayPort 1.2 cable reliably transmits 4K@60Hz over a 10 m distance thanks to its built-in signal amplification. The nylon-braided jacket enhances abrasion resistance and reduces tangling, while the white finish offers a discreet look for bright interiors. The cable is intended for stable digital video delivery between PCs, graphics cards, monitors and projectors where passive cables would suffer signal degradation.

Suitable for

• Connecting a PC or graphics card to a 4K monitor or projector at distances up to 10 m
• Conference rooms, lecture halls or home setups requiring longer DisplayPort runs
• Applications that need stable 4K@60Hz video without intermediate active repeaters

When it may not be suitable

This cable implements the DisplayPort 1.2 standard and is intended specifically for DisplayPort-equipped source and display devices. It is not appropriate where DisplayPort 1.4 or newer features (such as higher bandwidth modes, DSC-dependent higher resolutions or higher refresh rates) are required. If you need resolutions or refresh rates beyond 4K@60Hz, or multi-stream transport with higher aggregated bandwidth, consider a higher-specification cable or an interface that supports those features.

Key specifications

• Interface: DisplayPort 1.2 (active cable)
• Length: 10 metres
• Maximum supported resolution and refresh rate: 4096 x 2160 at 60Hz
• Cable jacket: nylon braid for enhanced durability
• Function: built-in active signal booster for long-distance digital video transmission

How to use

Connect the DisplayPort male connector on the source device (PC or graphics card) to the corresponding DisplayPort input on the monitor or projector. Ensure both devices are powered on and set to the appropriate input and output settings in their display configurations. The active booster is integrated into the cable and requires no external power; if a device fails to detect the display, verify connectors are fully seated and test alternate ports or devices to isolate potential compatibility issues.

What to consider before purchase

• Verify both source and display support DisplayPort input/output and the desired 4K@60Hz mode
• Confirm that 10 m cable length fits your routing and installation needs
• Assess whether DisplayPort 1.2 bandwidth is sufficient for your resolution and multi-stream requirements
• Check device firmware/drivers if handshake or EDID communication issues are a concern

Usage recommendations

For consistent 4K@60Hz performance, avoid sharp bends and heavy compression of the cable along its length, secure connectors to prevent strain, and route the cable away from large sources of electromagnetic interference. If longer runs or higher bandwidth are needed, evaluate cables or adapters supporting newer DisplayPort standards.