Power cable QOLTEC 50457 for UPS IEC C13 to C14, 3x0.75 mm², 1 m

QOLTEC 50457 is a 1-metre mains power cable with an IEC C13 female connector to an IEC C14 male connector, designed for connection between UPS units and IEC-compatible equipment. The cable contains three conductors of 0.75 mm² each and is intended for supplying power to small UPS systems, desktop computers, monitors and network devices where a short, reliable interconnection is required.

Advantages

This power lead offers a standard IEC C13–C14 interface for broad compatibility with UPS devices and IEC-equipped appliances. Its 1 m length provides a compact, tidy connection that reduces cable clutter while maintaining adequate reach for close-proximity devices. The three 0.75 mm² conductors deliver safe low-voltage mains transmission for small office and home equipment, and the molded connectors ensure a secure fit and straightforward plug-in operation.

Suitable for

• Connecting small UPS units to desktop PCs and monitors
• Powering network equipment such as switches and routers with IEC inlets
• Replacing short or worn IEC power leads in home or office setups
• Temporary or semi-permanent power connections in server racks and workstation areas

Key specifications

• Connector type: IEC C13 (female) to IEC C14 (male)
• Cable length: 1 metre
• Conductor configuration: 3 cores
• Conductor cross-section: 0.75 mm² per core
• Application: mains power connection for UPS, PCs, monitors and network equipment

How to use

Ensure both the UPS or power source and the target device are switched off before connecting. Insert the IEC C14 male connector into the UPS or power source inlet and the IEC C13 female connector into the device’s IEC inlet until secure. After connections are verified, switch on the power source and then the connected device. For disconnection, switch off power before removing connectors to avoid electrical arcing.

Usage recommendations

Use this cable for short-distance connections where a 1 m length is sufficient. Avoid routing the cable near heat sources or sharp edges and do not overload the connected device beyond the manufacturer’s power ratings. Inspect the cable periodically for damage to the insulation or connectors and replace it if wear is present.