Power Cable QOLTEC with angled SCHUKO CEE 7/7 (E/F) to IEC C13, 3x1.0 mm², 3 m

QOLTEC Power Cable with angled SCHUKO CEE 7/7 (E/F) plug to IEC C13 connector, 3 m, is a mains lead designed for everyday power delivery to IT and office devices. The cable uses three conductors of 1.0 mm² to carry standard household alternating current from European SCHUKO sockets to equipment with an IEC C13 inlet. Its 3-metre length and angled SCHUKO plug help position devices away from the wall and reduce strain at the wall socket.

Advantages

The cable provides a straightforward, safe connection between standard European mains outlets and devices that accept an IEC C13 connector. The angled SCHUKO plug reduces required clearance behind equipment and helps prevent accidental disconnection when space is limited. With a 3.0 m length and 1.0 mm² conductors, the lead balances flexibility and current-carrying capability for typical PCs, monitors, printers and UPS units. Construction follows conventional mains cable design to ensure compatibility with most office and home appliances that use the IEC C13 inlet.

Suitable for

• Desktop computers and workstations
• Monitors and all-in-one displays
• Printers, scanners and multifunction devices
• Uninterruptible Power Supplies (UPS) and power distribution units
• Laboratory and office equipment with IEC C13 inlet

When it may not be suitable

This cable is intended for general-purpose mains connections in regions using SCHUKO (CEE 7/7) sockets and for devices with an IEC C13 inlet. It is not suitable for appliances that require higher gauge conductors, specialized industrial plugs, or different regional plug types. It does not provide surge protection or voltage conversion; separate protective devices are required for those functions.

Key specifications

• Cable length: 3.0 m
• Conductor configuration: 3 core
• Conductor size: 1.0 mm² per core
• Plug type (mains): angled SCHUKO CEE 7/7 (E/F)
• Device connector: IEC C13
• Intended use: mains power for IT and office equipment

How to use

Ensure both the power outlet and the device inlet are compatible with the SCHUKO plug and IEC C13 connector respectively. Insert the IEC C13 connector firmly into the device inlet and plug the angled SCHUKO into a suitable grounded wall socket. Position the cable to avoid sharp bends and reduce mechanical stress on connectors. For safe operation, verify that the connected device’s rated current does not exceed the capacity of 1.0 mm² conductors and follow the device manufacturer’s power instructions.

What to consider before purchase

• Confirm your device has an IEC C13 inlet
• Verify your mains sockets accept SCHUKO CEE 7/7 (E/F) plugs
• Check that a 3.0 m cable length is suitable for your setup
• Ensure 1.0 mm² conductors meet the current requirements of your equipment

Usage recommendations

Use the cable indoors in dry conditions and avoid installing it under heavy furniture or through high-traffic areas. Combine with surge protection or UPS systems where voltage spikes or power interruptions are a concern. Replace the cable if insulation is damaged or connectors show wear.