Power Cable QOLTEC with Angled SCHUKO CEE 7/7 (E/F) to IEC C13, 3x1.0 mm², 5 m

QOLTEC Power Cable with an angled SCHUKO CEE 7/7 (E/F) plug and an IEC C13 connector, 5 m long, is designed to connect computers, monitors, printers and other IT and AV devices to grounded European mains outlets. The cable contains three conductors of 1.0 mm² and flexible insulation for straightforward routing behind desks or equipment racks. The right-angled SCHUKO plug reduces strain where the outlet is close to furniture or wall obstructions.

Advantages

This power lead combines a compact angled SCHUKO plug with a standard IEC C13 connector, allowing secure, widely compatible connections to common IT and consumer electronics. The 5 m length provides extended reach for flexible device placement without the need for extension cords. Conductors sized at 1.0 mm² offer adequate current carrying capacity for typical office and home equipment, while the flexible jacket simplifies installation and cable management.

Suitable for

• Desktop computers and workstations
• Monitors and all-in-one displays
• Laser and inkjet printers
• Audio–visual equipment such as amplifiers and set-top boxes with IEC C13 inlets
• Office and home power distribution where a grounded SCHUKO outlet is used

When it may not be suitable

This cable is intended for devices with an IEC C13 inlet and standard mains voltage in countries using SCHUKO (CEE 7/7) sockets. It is not suitable for appliances that require a higher current rating, special connectors (for example IEC C19 or country-specific plugs), or ungrounded outlets. It should not be used for heavy industrial equipment or applications that demand specialized power cabling or certification beyond general IT and AV use.

Key specifications

• Plug type: Angled SCHUKO (CEE 7/7, E/F)
• Connector type: IEC C13
• Cable length: 5 m
• Conductor configuration: 3 cores
• Conductor cross-section: 1.0 mm² per core
• Insulation: flexible PVC jacket suitable for indoor use

How to use

Ensure the device is powered off before connecting the cable. Insert the IEC C13 connector into the device inlet until it seats firmly. Plug the angled SCHUKO plug into a grounded mains socket, ensuring correct orientation and a secure fit. Route the cable to avoid sharp bends, pinching, or heat sources. For best cable management, guide the lead along desk edges or behind furniture and avoid taut tension on the connectors. Disconnect by pulling the plug, not by tugging the cord.

What to consider before purchase

• Verify your device has an IEC C13 inlet.
• Confirm that a SCHUKO (CEE 7/7) grounded socket is available at the power source.
• Assess whether 5 m length is appropriate for your placement needs and cable routing.
• Ensure a 1.0 mm² conductor cross-section meets the current requirements of your equipment.

Usage recommendations

Use this cable indoors for office and home electronics. Avoid prolonged exposure to moisture, direct sunlight, or temperatures outside typical indoor ranges. Inspect the cable periodically for damage and replace it if any insulation cracking or connector deformation is observed.