Power Cable QOLTEC SCHUKO CEE 7/7 (E/F) to IEC C13 3×0.75 mm² 1.5 m

QOLTEC power cable with SCHUKO CEE 7/7 (E/F) plug and IEC C13 connector, 1.5 m long. The cable is built with three conductors of 0.75 mm², designed to supply mains power to desktop PCs, monitors, printers, UPS units and other IT and electrical equipment that use an IEC C13 inlet. The SCHUKO CEE 7/7 plug fits standard European sockets and provides grounding for safe operation in home and office environments.

Advantages

This power cable delivers a straightforward, standardised connection between European mains outlets and devices with IEC C13 inlets. With three 0.75 mm² conductors it balances flexibility and current-carrying capacity for common computer and peripheral equipment. The 1.5 m length offers a practical reach for typical desk and rack setups while minimising excess cable. The cable’s design supports grounded connection and reliable contact at both ends.

Suitable for

• Desktop computers and workstations
• Monitors and display units
• Printers, scanners and office peripherals
• Uninterruptible Power Supplies (UPS) and power distribution units
• Home entertainment and small network devices with IEC C13 inlet

When it may not be suitable

This cable is intended for standard mains voltages and typical office or home equipment. It is not designed for outdoor use, exposure to moisture, or installation in environments requiring special-rated or flame-retardant cables. For devices that demand higher current capacity or thicker conductors, a cable with larger conductor cross-section should be chosen.

Key specifications

• Connector A: SCHUKO CEE 7/7 (E/F) plug for European mains sockets
• Connector B: IEC C13 female connector for device inlet
• Conductor configuration: 3 cores
• Conductor cross-section: 0.75 mm² per core
• Length: 1.5 m
• Application: mains power for IT and office equipment with IEC C13

How to use

Inspect the cable and connectors for visible damage before use. Insert the IEC C13 connector firmly into the device inlet and plug the SCHUKO CEE 7/7 into a compatible grounded European wall socket. Ensure the connection is secure and that the cable is routed to avoid strain, sharp bends or pinch points. Disconnect by pulling the plug rather than yanking the cable. If used with a UPS or PDU, follow the equipment manufacturer’s guidelines on connection order and load limits.

What to consider before purchase

• Verify your device uses an IEC C13 inlet.
• Confirm that 0.75 mm² conductors provide adequate current capacity for your equipment.
• Ensure 1.5 m length suits your setup and outlet location.
• Check whether you need a cable rated for outdoor, industrial, or high-temperature environments.

Usage recommendations

Use the cable indoors with typical office and home IT equipment. Avoid overloading the cable by connecting devices whose combined current exceeds the cable’s safe operating range, and store the cable loosely coiled to prevent kinks.