Power cable QOLTEC SCHUKO CEE 7/7 (E/F) to IEC C13, 3x1.0 mm², 1.5 m

QOLTEC power cable with SCHUKO CEE 7/7 (E/F) plug to IEC C13 connector is a 1.5 m mains lead designed for connecting computers, monitors, printers, UPS units and other IEC C13-equipped devices to standard mains sockets. The cable uses three conductors with a cross-section of 1.0 mm², providing standard-rated wiring for everyday home and office power delivery. This lead is intended for appliances that accept an IEC C13 inlet and for use with SCHUKO-style (CEE 7/7) wall outlets.

Advantages

This QOLTEC power cable combines a universal SCHUKO CEE 7/7 plug with an IEC C13 connector to ensure compatibility with a wide range of IT and office equipment. The three 1.0 mm² conductors deliver stable current flow for typical small to medium power devices, while the 1.5 m length offers flexibility in placement without excessive slack. The cable is suitable for standard mains voltages and provides a simple, reliable connection method for devices with IEC C13 sockets.

Suitable for (tasks / use cases)

• Connecting desktop PCs and workstations to mains power
• Powering monitors, printers and multifunction devices
• Linking UPS units and power strips with IEC C13 inlets
• Replacing worn or lost IEC C13 mains leads for compatible appliances

When it may not be suitable

This cable is not designed for high-current or industrial equipment that requires larger conductor cross-sections or dedicated connectors. It is also not intended for outdoor use or in environments requiring special-rated cables (e.g., heat-resistant, oil-resistant, or flame-retardant types) unless those ratings are specifically confirmed. For devices with non-IEC C13 inlets or non-SCHUKO mains configurations, a different cable or adapter will be required.

Key specifications

• Plug type: SCHUKO CEE 7/7 (E/F) to IEC C13
• Conductor configuration: 3 cores
• Conductor cross-section: 1.0 mm² per core
• Length: 1.5 m
• Typical application: mains lead for IT and office equipment with IEC C13 inlet
• Intended environment: indoor use (home and office)

How to use

Ensure the appliance to be connected is switched off and unplugged before attaching the cable. Insert the IEC C13 connector firmly into the device inlet until it seats securely. Plug the SCHUKO CEE 7/7 end into a compatible mains socket. Verify that the socket provides the correct voltage and that any protective grounding is present if required by the appliance. After use, unplug by gripping the connector bodies rather than pulling on the cable to avoid mechanical stress.

What to consider before purchase

• Confirm your device has an IEC C13 inlet.
• Ensure SCHUKO CEE 7/7 plug is compatible with your local mains sockets.
• Check that 1.0 mm² conductors meet the current requirements of your equipment.
• Decide if 1.5 m length is suitable for device placement and cable routing.

Usage recommendations

Use this cable indoors with IT and office equipment that specifies an IEC C13 mains lead; avoid running the cable through sharp edges, high-temperature zones or areas with heavy foot traffic. Replace the cable if any damage to insulation or connectors is visible, and always match cable specifications to the device’s rated current and safety requirements.