Power cable QOLTEC with CEE 7/16 (C) plug, 2x0.75 mm² copper conductors, stripped and soldered, 1.8 m

QOLTEC power cable with a CEE 7/16 (C) Europlug and two copper conductors 2x0.75 mm², length 1.8 m, supplied stripped and soldered for immediate termination. The cable is intended for low-power electrical devices and appliances that accept the slim Euro C (CEE 7/16) plug. Its pre-stripped and soldered conductor ends simplify connection to terminal blocks, screw clamps or internal wiring during repairs and replacements in domestic and office environments.

Advantages

The cable features two solid copper conductors with a cross-section of 0.75 mm² each, providing reliable conductivity for low-power loads. The CEE 7/16 (C) plug fits outlets and devices designed for the Euro C standard. Pre-stripped and soldered ends reduce installation time and ensure secure, corrosion-resistant connections. At 1.8 m length the cable offers reach suitable for common furniture and desk arrangements without excess slack.

Suitable for

• Powering small household appliances such as radios, chargers and some audio equipment
• Replacement mains lead for devices using a CEE 7/16 (C) Europlug
• Repair and maintenance tasks requiring direct termination to terminal blocks or connectors
• Office equipment with low current consumption that accept Euro C plugs

Key specifications

• Plug type: CEE 7/16 (C) Europlug
• Conductor configuration: 2 conductors, copper
• Conductor cross-section: 0.75 mm² per conductor
• Cable length: 1.8 m
• End preparation: stripped and soldered conductor ends for direct termination
• Intended use: low-power mains supply for appliances and equipment

How to use

Before use, ensure the target device is compatible with a CEE 7/16 (C) Europlug and rated for the cable's conductor size. Insert the plug into a compatible outlet and connect the stripped and soldered conductor ends to the device's terminal points or connector following the device manufacturer's wiring instructions. Secure all connections and, where applicable, restore protective covers or strain relief. Do not use the cable with devices that require earth/ground connections unless the device and plug type are compatible.

Usage recommendations

Use the cable only within the rated mains voltage and current for your device type. Avoid routing the cable where it may be pinched, cut or exposed to heat sources. For permanent or high-power installations choose a cable and plug rated for the required current and with appropriate earthing. If you are uncertain about compatibility or installation, consult a qualified electrician.