Low-Pressure Mounting Foam Quantec PMPL-900-65L, 880 ml, canister

Quantec PMPL-900-65L is a low-pressure mounting foam supplied in an 880 ml canister for precise filling, sealing and insulating of gaps and joints. Formulated for controlled expansion and reduced overspill, this mounting foam is intended for use in window and door installation, thermal and acoustic insulation, and sealing of wall and floor penetrations. The product is compatible with standard foam application guns and suitable for professional and DIY construction and renovation tasks.

Advantages

The foam offers low initial expansion to minimize deformation of surrounding materials and to reduce the need for trimming. Its 880 ml canister format provides extended application time per unit, while compatibility with standard foam guns ensures straightforward application. The formulation provides good adhesion to common building substrates and contributes to thermal and acoustic insulating performance when used to fill cavities and joints.

Suitable for

• Filling and sealing gaps around window and door frames
• Thermal and acoustic insulation of wall cavities and joints
• Sealing service penetrations for cables and pipes
• Installation and adjustment of frames where reduced expansion is required

Key specifications

• Volume per canister: 880 ml
• Low-pressure, low-expansion polyurethane-based mounting foam
• Suitable for use with standard foam application guns
• Designed for controlled expansion and reduced overspill
• Applicable for thermal and acoustic insulation and sealing

How to use

Shake the canister according to manufacturer recommendations and attach it to a compatible foam gun. Apply to clean, dust-free and slightly dampened surfaces, dispensing foam in layers or beads depending on gap width. Allow the foam to partially cure between layers for larger voids, and cut or trim cured excess with a knife. Finish with appropriate sealants or trims where required.

Usage recommendations

Use protective gloves and eye protection during application. Store canisters upright in a cool, dry place and avoid exposure to temperatures outside the recommended storage range. Ensure adequate ventilation while applying foam and follow local building regulations for thermal and acoustic insulation installations.