Coaxial cable Rangeful HF240 BNC male to BNC female, 50 Ω, 10 m

Rangeful HF240 is a 10 m coaxial cable terminated with a BNC male connector on one end and a BNC female connector on the other. The cable is designed with a 50 Ω impedance for RF and general signal transmission over moderate distances. Its flexible construction allows straightforward routing and installation in test benches, radio equipment, CCTV systems and laboratory setups where a reliable 50-ohm connection is required.

Advantages

The HF240 cable provides consistent 50 Ω impedance across its length to minimize signal reflections and maintain signal integrity. BNC male and female terminations allow quick, tool-free connections to equipment with standard BNC ports. The 10 m length balances reach and manageability, enabling connections between devices without excessive slack. Flexibility and standard BNC compatibility reduce installation time and simplify system changes.

Suitable for

• Connecting RF test equipment and spectrum analyzers
• Linking radio transceivers and receivers
• CCTV camera and monitor connections with BNC ports
• Temporary or bench-top laboratory signal routing
• Audio/video systems that use 50 Ω BNC cabling

Key specifications

• Connector types: BNC male to BNC female
• Impedance: 50 Ω
• Length: 10 m
• Cable type: coaxial, flexible construction suitable for moderate bending
• Typical applications: RF and signal transmission, test and measurement, CCTV

How to use

Inspect connectors and cable for damage before use. Align the BNC male pin with the female socket and push then twist the male connector to the bayonet lock until it clicks or seats firmly. For removal, pull back the male connector sleeve and rotate to release. Route the cable to avoid sharp bends and tight strain points; secure with cable ties if needed. Ensure both connected devices are powered down when making or breaking connections for protection of sensitive equipment whenever possible.

Usage recommendations

For best performance maintain gentle bend radii and avoid repeated flexing at the connector ends. Use this 10 m cable for moderate-distance connections; for higher-frequency or longer runs consider checking insertion loss and VSWR specifications in the system context. Store the cable coiled without sharp kinks and keep connectors covered when not in use.