Coaxial cable Rangeful HF240 50 Ohm, BNC male to BNC male, 12 m

Rangeful HF240 is a 12 m coaxial cable with BNC male connectors on both ends and a characteristic impedance of 50 Ohm. It is designed to carry RF and video signals between devices that use BNC interfaces, providing a standardized connection for moderate-distance signal transmission in laboratory, broadcast and instrumentation environments.

Advantages

The cable combines a 50 Ohm impedance matching the requirements of many RF test and measurement systems with robust BNC male to BNC male terminations for secure, quick coupling. Its 12 m length enables flexible placement of equipment without the need for additional adapters, while the coaxial construction reduces external interference and maintains signal integrity over the stated distance.

Suitable for

• Connecting RF test equipment such as signal generators, spectrum analyzers and network analyzers
• Video signal routing in broadcast, CCTV or monitoring setups that use BNC connectors
• Laboratory and instrumentation cabling for measurements and prototype testing
• Temporary or permanent interconnections in studios, control rooms and test benches

Key specifications

• Length: 12 metres
• Connector type: BNC male to BNC male
• Characteristic impedance: 50 Ohm
• Cable type: coaxial
• Typical applications: RF, video and test instrumentation connections

How to use

Inspect connectors and cable for visible damage before use. Align the BNC male connector with the BNC female socket on each device, push the connector onto the socket and rotate until it locks with the bayonet coupling. Ensure both ends are securely attached and avoid sharp bends or kinks along the cable run. Route the cable to minimize proximity to high-power mains wiring and sources of electromagnetic interference for best signal quality.

Usage recommendations

Use the cable within its intended frequency and power ranges; avoid exposing it to excessive mechanical stress, moisture or temperatures outside normal equipment room conditions. For critical RF measurements, verify impedance matching and connector integrity; replace the cable if you observe loss of signal quality or intermittent connections.