Coaxial cable Rangeful HF400 BNC male to BNC female 12m, full copper, 50 Ω

Rangeful HF400 coaxial cable with BNC male to BNC female connectors, 12 m length, full copper construction and 50 Ω impedance is designed for reliable transmission of RF and video signals between devices with BNC interfaces. The cable combines a flexible jacket with a shielded design to reduce interference and maintain signal integrity over moderate distances, making it suitable for test setups, CCTV installations, amateur radio and laboratory connections that require a standard 50 ohm link.

Advantages

The cable uses full copper conductors to ensure consistent conductivity and low insertion loss. The BNC male to BNC female connectors provide a secure bayonet connection for quick mating and demating. The 12 m length balances reach and manageability while the 50 Ω characteristic impedance matches common RF and video equipment to minimize reflections. Shielding and a durable outer jacket help protect the inner conductor from electromagnetic interference and mechanical wear.

Suitable for

• Connecting RF test instruments and measurement equipment with BNC ports
• CCTV camera to DVR connections where BNC interfaces are used
• Amateur radio equipment and antenna feedlines for short runs
• Laboratory and bench setups requiring shielded 50 Ω links

Key specifications

• Connector types: BNC male to BNC female
• Cable length: 12 m
• Conductor material: full copper
• Characteristic impedance: 50 Ω
• Shielding: braided and/or foil shielding for reduced EMI
• Jacket: flexible protective outer sheath suitable for indoor use

How to use

Route the cable between the two devices ensuring connectors align with the BNC ports. Push the BNC male connector onto the female jack and rotate the bayonet sleeve until it locks to secure the connection. Avoid tight bending radii near the connectors to prevent stress on the cable and maintain consistent signal performance. For best results, keep the cable away from high-power mains wiring or strong noise sources.

Usage recommendations

Use this Rangeful HF400 cable for indoor installations or bench use where a 12 m 50 Ω shielded connection is required. Inspect connectors for debris before mating, avoid sharp bends and sustained tension, and store coiled without kinks. For outdoor or permanent installs, consider additional weatherproofing at connection points.