Coaxial RF cable Rangeful HF400 BNC male to PL259 UHF 30 m, 50 Ω, full copper

Rangeful HF400 coaxial RF cable with BNC male to PL259 (UHF) connectors is a 30-meter, 50 Ω cable constructed with full-copper conductors. It is intended for HF, VHF and UHF radio and antenna connections where consistent impedance, low insertion loss and secure connector mating are required. The cable's 30 m length and standard connector pair make it suitable for connecting transceivers, scanners, base stations and other radio equipment in indoor and protected outdoor installations.

Advantages

The cable features full-copper conductors that provide reliable conductivity and lower signal attenuation compared with copper-clad alternatives. The 50 Ω characteristic impedance supports typical radio and antenna systems and helps maintain proper SWR when matched to equipment. BNC male and PL259 (UHF) connectors offer common, compatible terminations for a wide range of amateur radio and commercial radio devices. The overall construction is designed for durability in indoor and protected outdoor environments, with attention to connector strain relief and consistent cable impedance.

Suitable for

• Connecting HF/VHF/UHF transceivers to antennas
• Linking base station equipment and external tuners
• Scanner and receiver antenna installations
• Temporary or semi-permanent indoor and sheltered outdoor antenna runs

Key specifications

• Length: 30 m
• Characteristic impedance: 50 Ω
• Connector pair: BNC male to PL259 (UHF)
• Conductor material: full copper
• Intended frequency range: HF / VHF / UHF applications
• Usage environment: indoor and protected outdoor

How to use

Route the coaxial cable between the radio equipment and the antenna, avoiding sharp bends and tight coils that can deform the cable and affect impedance. Ensure BNC male and PL259 connectors are fully seated and properly tightened to the matching device connectors; do not overtighten to avoid damage to connector threads or mating surfaces. When installing outdoors in a protected location, secure the cable with appropriate clips or ties at intervals to reduce mechanical strain on connectors and to prevent sagging.

Usage recommendations

Verify antenna and radio impedance are matched to 50 Ω to achieve optimal performance and minimize reflected power. Inspect connectors periodically for corrosion or looseness and replace any damaged parts. For long-term outdoor exposure, provide additional protection at connector joints such as weatherproofing tape or boots to extend service life.