Coaxial cable Rangeful Mini UHF male to Mini UHF female RG58 50Ω, 5 m

Coaxial cable Rangeful Mini UHF male to Mini UHF female RG58 50Ω, 5 m is a compact RF interconnect built on RG58 coaxial with a nominal impedance of 50 ohms and a 5-metre length. It features a Mini UHF (MUHF) male connector on one end and a MUHF female connector on the other, providing a small-form-factor solution for short RF links where space is limited. This cable delivers the typical electrical characteristics of RG58 and is intended for use with radios, scanners, antennas and test instruments that accept MUHF terminations.

Advantages

The cable offers a balance of flexibility and RF performance typical of RG58 construction, combined with compact Mini UHF connectors that reduce mechanical bulk compared with standard UHF connectors. Its 50 Ω characteristic impedance maintains signal integrity for compatible equipment and test setups. The fixed 5 m length provides reach for rack-to-rack or bench-to-equipment connections without excess slack in many installation scenarios.

Suitable for

• Connecting handheld or mobile radios to external antennas where MUHF fittings are used
• Linking scanners and monitoring receivers to antenna inputs
• Short-distance RF test connections between instruments and devices
• Laboratory setups and bench testing requiring a 50 Ω coaxial interconnect
• Tight-space installations where reduced connector size is required

Key specifications

• Cable type: RG58 coaxial
• Characteristic impedance: 50 Ω
• Connector A: Mini UHF (MUHF) male
• Connector B: Mini UHF (MUHF) female
• Length: 5 m
• Typical use: RF signal transmission for short links and test applications

How to use

Connect the MUHF male end to the corresponding female socket on the radio, antenna or test instrument and mate the MUHF female end to the male fitting on the counterpart device. Ensure connectors are hand-tightened to avoid cross-threading and to maintain a good electrical contact; do not overtighten. Route the cable to avoid sharp bends, excessive tension or contact with heat sources to preserve the coaxial geometry and impedance. For measurement tasks, place the cable in the same position during repeated tests to reduce variability.

Usage recommendations

Verify that both connected devices are specified for 50 Ω systems and that MUHF connectors are compatible before use. For critical measurements or long-term outdoor installations, consider cable loss and environmental protection; for higher-frequency or longer runs, evaluate using alternative cable types with lower attenuation.