Coaxial cable Rangeful Mini UHF (MUHF) male to N male, RG58/U 50 Ω, 10 m

Rangeful Mini UHF (MUHF) male to N male coaxial cable, 10 m, on RG58/U conductor with 50 Ω impedance, provides a flexible RF connection for devices with MUHF and N interfaces. The cable is intended for signal transmission between antennas, transceivers, radios and measurement equipment where a 50-ohm match and a moderate length are required. Its construction follows common RG58/U characteristics to ensure predictable attenuation and mechanical flexibility suitable for installations and temporary setups.

Advantages

The cable combines a compact Mini UHF (MUHF) male connector on one end and a robust N male connector on the other, enabling compatibility between small-form RF ports and standard N-type equipment. Using an RG58/U 50 Ω conductor ensures consistent impedance for reduced signal reflections and simplified system matching. At 10 meters length the cable offers a balance between reach and manageable signal loss for many UHF and VHF applications. The flexible jacket and common RG58 construction make routing and temporary deployment straightforward.

Suitable for

• Connecting antennas to transceivers or receivers with MUHF and N interfaces
• Field test setups and RF measurement where a 10 m patch cable is needed
• Temporary or semi-permanent installations that require a flexible 50 Ω cable
• Linking handheld equipment or small base stations to standard N-type devices

Key specifications

• Cable type: RG58/U conductor
• Impedance: 50 Ω
• Length: 10 m
• Connector (end A): Mini UHF (MUHF) male
• Connector (end B): N male
• Typical use: RF signal transmission in VHF/UHF frequency ranges
• Construction: flexible jacket suitable for indoor and temporary outdoor use

How to use

Connect the MUHF male end to the device or antenna with the corresponding MUHF female socket and tighten the coupling to ensure a secure mechanical and electrical connection. Attach the N male end to the N-type female port on the other device, ensuring threads are properly engaged and hand-tightened; use a torque wrench when specified by the equipment manufacturer. Route the cable to avoid sharp bends, crushing, or repeated flexing near the connectors to maintain electrical performance. For measurement setups, keep connections clean and verify continuity and VSWR with appropriate test equipment before operation.

Usage recommendations

Store the cable coiled without sharp kinks and protect connector ends with caps when not in use. Avoid exposure to prolonged direct sunlight or chemical solvents to preserve jacket integrity. For critical RF links, verify insertion loss over the required frequency range and replace the cable if connector wear or increased VSWR is detected.