Coaxial adapter cable Rangeful Mini UHF (Male) to N Male RG58 50 Ω, 12 m

Rangeful Mini UHF (Male) to N Male RG58 50 Ω, 12 m is a coaxial adapter cable designed to connect equipment with Mini UHF (also known as MUHF/T-124) interfaces to devices or antennas using an N-type male connector. The cable uses RG58 coaxial construction with 50 ohm impedance and a 12 metre length, providing a flexible link for RF signal transfer where this connector combination and impedance are required.

Advantages

The cable combines a Mini UHF male connector and an N male connector on a continuous RG58 50 Ω transmission line, offering straightforward interconnection without the need for separate adapters. Its 12 m length allows placement flexibility between transceivers, antennas and test instruments while maintaining a consistent characteristic impedance. The RG58 core balances flexibility and signal handling for short- to medium-run RF connections.

Suitable for

• Amateur radio transceiver to antenna or tuner connections
• Test bench setups with instruments using Mini UHF and N connectors
• Feed lines between outdoor antennas and indoor equipment when a 12 m lead is required
• Temporary installations and field operations where a flexible 50 Ω cable is needed

Key specifications

• Cable type: RG58 coaxial
• Impedance: 50 Ω
• Length: 12 m
• Connector A: Mini UHF (male)
• Connector B: N-type (male)
• Application: RF signal transmission, UHF/VHF frequency ranges typical for 50 Ω systems

How to use

Align the Mini UHF male connector with the Mini UHF female socket and engage by screwing or pushing according to the connector design until secure. Connect the N male connector to the corresponding N female jack by threading the coupling nut until hand-tight; use moderate torque if required with an appropriate wrench, taking care not to over-tighten. Route the 12 m RG58 cable to avoid sharp bends, kinks or heavy compression and keep it clear of strong electrical interference sources. Verify continuity and VSWR as needed in the installation before transmitting at full power.

Usage recommendations

The cable is suitable for general-purpose 50 Ω RF connections, but for permanent outdoor runs or installations requiring lower loss over long distances consider using thicker low-loss coaxial types. Inspect connectors periodically for corrosion or wear and replace the cable if physical damage or degraded signal performance is observed.