Coaxial Cable Rangeful RG58U 30 m Low Loss 50 Ω PVC outer jacket

Rangeful RG58U 30 m coaxial cable is a 50 Ω low-loss RF cable designed for short-distance signal transmission. It features a PVC outer jacket that provides mechanical protection and flexibility for indoor and outdoor installations where standard RG58 performance is required. The cable is suitable for antenna feeds, radio equipment connections and test setups that demand consistent impedance and low attenuation across typical VHF/UHF frequencies.

Advantages

The cable combines a familiar RG58U construction with reduced signal loss characteristics for improved performance over short runs. Its 30 m length covers common installation needs without excess slack, and the PVC jacket offers abrasion resistance and basic weather protection while maintaining flexibility for routing through conduits or around corners. The 50 Ω characteristic impedance ensures compatibility with most RF equipment designed for this standard.

Suitable for

• Antenna feeds for VHF/UHF radio systems
• Connections between radio transceivers and antennas
• Laboratory and test bench RF measurements
• Short-distance CCTV or RF distribution links where RG58 is specified

Key specifications

• Nominal impedance: 50 Ω
• Length: 30 m
• Cable type: RG58U coaxial
• Construction: central conductor with dielectric, braided shield
• Outer jacket material: PVC for mechanical protection and flexibility
• Designed for low loss over short to moderate distances

How to use

Cut the cable to the required length and strip the outer jacket, dielectric and inner conductor following standard coaxial cable preparation practices. Use appropriate RF connectors rated for 50 Ω to maintain impedance continuity; crimp or solder connectors according to the connector manufacturer's instructions. Route the cable to minimize sharp bends and avoid running parallel to power cables to reduce interference. Secure the cable with suitable clips or ties without compressing the jacket excessively.

Usage recommendations

For best performance, keep runs as short as practical and use quality 50 Ω connectors. If the installation is exposed to prolonged sunlight or harsh weather, consider additional UV-resistant or outdoor-rated protection, as PVC provides limited long-term UV resistance.