Drill Bit RAWLPLUG TURBODRILL SDS Max 16 x 550/690 mm

RAWLPLUG TURBODRILL SDS Max 16 x 550/690 mm is a long-reach SDS Max drill bit designed for use with rotary and hammer drills. With a 16 mm diameter, 550 mm working length and 690 mm overall length, this drill bit is intended for drilling into concrete, masonry and other hard substrates encountered on construction and installation sites. The TURBODRILL design promotes effective debris evacuation and keeps the bit stable during heavy-duty drilling operations.

Advantages

The TURBODRILL geometry improves chip removal to reduce reaming and sticking, while the SDS Max shank ensures secure retention in compatible hammer drills. Its extended working length allows access to deep holes without changing to extension tools. The hardened cutting edges and robust flute profile are engineered to withstand repeated impact and rotary loading during anchoring and through-drilling tasks.

Suitable for

• Drilling through concrete for anchor installation
• Creating deep holes for plumbing and electrical installations
• Core and through-drilling in masonry and blockwork
• Heavy-duty construction and renovation work requiring long-reach drilling

Key specifications

• Drill type: SDS Max rotary and hammer drill bit
• Diameter: 16 mm
• Working length: 550 mm
• Overall length: 690 mm
• Tip/geometry: TURBODRILL design for improved chip removal and stability
• Material/finish: hardened cutting edges with robust flute profile suitable for concrete and masonry

How to use

Fit the SDS Max shank securely into a compatible hammer or rotary drill and verify the chuck locking mechanism. Mark the drilling point, start at low speed to establish the hole, then apply steady pressure while allowing the hammer action to operate. Periodically withdraw the bit to clear debris and prevent clogging; for deep holes use compressed air or vacuum to remove dust. Use appropriate drill speed and impact settings according to the substrate hardness and the drill manufacturer’s instructions.

Usage recommendations

Use eye, ear and respiratory protection when drilling. Select a drill with sufficient power rating for SDS Max bits and match drilling speed to material. For anchoring, confirm hole depth and clean holes before inserting anchors. Replace the bit when cutting performance visibly degrades or when tip damage is present.