Drill Bit RAWLPLUG SDS‑MAX 24 mm, model RT‑MAXT‑24/340, for hammer drills

RAWLPLUG SDS‑MAX 24 mm drill bit (RT‑MAXT‑24/340) is engineered for use with SDS‑MAX rotary hammer drills to create clean, accurate bores in concrete, masonry and natural stone. The 24 mm diameter provides an appropriate hole size for many anchor types, through‑holes and construction fastenings. The bit features an SDS‑MAX shank compatible with heavy‑duty hammer drilling systems and is intended for applications that require impact energy transfer and reliable bit retention.

Advantages

This SDS‑MAX 24 mm drill bit offers efficient material removal and stable drilling performance thanks to a robust flute geometry and carbide tip designed for high‑impact use. Compatibility with SDS‑MAX chucks ensures secure fitting and quick bit changes. The length and diameter combination is balanced to deliver effective drilling depth while maintaining control and reducing bit wobble during operation.

Suitable for

• Drilling holes in concrete for anchors and fastenings
• Creating through‑holes in masonry and stone
• Heavy‑duty demolition and construction drilling with rotary hammers
• Installation of mechanical and chemical anchor systems

Key specifications

• Shank type: SDS‑MAX compatible
• Diameter: 24 mm
• Intended material: concrete, masonry, natural stone
• Drilling method: rotary hammer / impact drilling
• Tip material: carbide cutting head (for impact resistance)

How to use

Select an SDS‑MAX rotary hammer drill rated for the required drilling depth and set it to the appropriate hammer drilling mode. Secure the bit into the drill's SDS‑MAX chuck until it locks. Mark the drilling position, start at low speed to locate the drill point, then apply steady pressure while allowing the hammer action to advance the bit. Periodically withdraw the bit to clear dust from the hole and reduce heat buildup. For through‑holes, verify alignment and progress from both sides if necessary to avoid breakout.

Usage recommendations

Use suitable personal protective equipment including eye protection, hearing protection and dust mask when drilling. Match drill speed and applied pressure to substrate hardness, and use water suppression or a dust extraction system when required by site regulations. Inspect the bit for wear or damage before use and replace the bit when carbide tips become blunt to maintain drilling quality and safety.