Drill Bit RAWLPLUG SDS‑MAX 30 mm RT‑MAXT‑30/340

RAWLPLUG SDS‑MAX 30 mm RT‑MAXT‑30/340 is a high‑diameter drill bit designed for use with SDS‑MAX rotary hammers. It is intended for drilling large holes in concrete, reinforced concrete, masonry and similar hard building materials. The 30 mm cutting diameter and the shank shaped for SDS‑MAX chucks allow secure fitting and efficient transmission of impact energy, while the overall length is chosen to suit medium‑depth drilling tasks common in construction and installation work.

Advantages

The drill bit combines a robust carbide tip geometry with a shank compatible with SDS‑MAX systems to provide stable drilling performance and good wear resistance when used in demanding substrates. Its 30 mm diameter yields a balance between hole size and drilling speed for applications such as anchor and sleeve installations. The tool is manufactured to meet practical jobsite requirements: optimized flute design helps remove debris from the hole, and the shank profile reduces slippage in the chuck.

Suitable for

• Drilling 30 mm anchor holes in concrete and reinforced concrete
• Creating openings for chemical anchors, sleeves and through‑fixings
• Medium‑depth drilling tasks in masonry and stone
• Construction, renovation and mechanical installation work

Key specifications

• Drill diameter: 30 mm
• SDS‑MAX compatible shank for rotary hammers
• Designed for use in concrete, reinforced concrete and masonry
• Medium overall length suited to standard installation depths
• Carbide tip and spiral flute for efficient material removal

How to use

Install the bit into an SDS‑MAX rotary hammer according to the tool manufacturer's instructions, ensuring the chuck locks the shank securely. Select hammer or hammer‑drill mode as required for the material. Start drilling at low speed to establish the hole, then apply steady pressure while allowing the hammer action to perform the work. Periodically withdraw the bit to clear dust and debris from the hole and to prevent overheating. Use appropriate personal protective equipment such as eye protection, hearing protection and dust control measures when drilling.

Usage recommendations

For best results in reinforced concrete, use short drilling intervals and clear the hole of debris frequently. Match drill diameter and depth to anchor or sleeve specifications and use recommended torque and installation procedures for fasteners. Store the bit in a dry place and inspect the carbide tip before use; replace the bit when wear or damage reduces drilling efficiency.