Drill Bit RAWLPLUG TURBODRILL SDS Max 32 x 1160 x 1300 mm

RAWLPLUG TURBODRILL SDS Max 32 x 1160 x 1300 mm is a long-reach SDS Max drill bit designed for use with SDS Max rotary hammers. It provides a 1160 mm working length and 1300 mm overall length for drilling large-diameter holes in concrete, masonry and natural stone. The bit is intended for through and deep drilling tasks commonly required in construction, structural installation and heavy-duty anchoring applications.

Advantages

The TURBODRILL geometry and SDS Max shank ensure efficient impact energy transfer and stable centring during drilling. Its extended working length enables access to deep or hard-to-reach zones without the need for extensions, while the large 32 mm diameter makes it suitable for installing heavy anchors, sleeves and service penetrations. Hardened cutting edges and optimized flute design support reliable dust evacuation and prolonged tool life when used with appropriate drilling equipment and techniques.

Suitable for

• Drilling large-diameter holes in reinforced and unreinforced concrete
• Creating ducts and penetrations for plumbing, electrical and HVAC installations
• Through drilling and deep anchoring for structural fixings
• Work on masonry and natural stone where extended reach is required

Key specifications

• Shank type: SDS Max
• Drill diameter: 32 mm
• Working length: 1160 mm
• Overall length: 1300 mm
• Material suitability: concrete, masonry, natural stone
• Intended use: through and deep drilling, anchor and service penetrations

How to use

Install the bit securely into an SDS Max rotary hammer according to the tool manufacturer's instructions. Mark the drilling position and start drilling at low speed to establish a precise centre. Use the hammer function for effective impact drilling in concrete and masonry; apply steady axial pressure but avoid excessive force to prevent premature wear. Periodically retract the bit to clear dust from the hole and improve cutting efficiency. When drilling reinforced concrete, proceed slowly when contacting rebar and follow safety guidance for rebar cutting or avoidance.

Usage recommendations

For best performance use with rotary hammers rated for SDS Max bits and with sufficient impact energy for a 32 mm diameter hole. Combine with dust extraction equipment where possible to maintain a clean work area and extend bit lifetime. Inspect the bit before use for wear or damage and replace if cutting edges are worn. Store the drill bit in a dry environment to prevent corrosion.