Drill bit RAWLPLUG TURBODRILL SDS‑Max 32 x 780/920 mm

RAWLPLUG TURBODRILL SDS‑Max 32 x 780/920 mm is a long‑reach drill bit engineered for rotary and rotary‑percussion drilling in concrete and masonry. With a 32 mm diameter, a working length of 780 mm and an overall length of 920 mm, this SDS‑Max shank bit is intended for use with compatible rotary hammers. The design supports deep anchoring, through‑holes and installation work where extended reach and sustained drilling performance are required.

Advantages

The TURBODRILL geometry and carbide tip provide reliable cutting and fast dust evacuation during drilling in hard substrates. The SDS‑Max shank ensures secure retention and efficient transfer of impact energy from the rotary hammer. The long working length reduces the need for extensions or multiple bit changes on jobs that require deep holes, improving workflow efficiency on construction and renovation sites.

Suitable for

• Drilling deep anchor holes in concrete and reinforced concrete
• Creating through‑holes for piping and cabling in masonry
• Installation tasks requiring long‑reach drilling for HVAC, electrical and plumbing
• Professional construction and renovation projects with heavy‑duty rotary hammers

Key specifications

• Diameter: 32 mm
• Working length: 780 mm
• Overall length: 920 mm
• Shank type: SDS‑Max compatible
• Intended materials: concrete and masonry
• Tip material: tungsten carbide (carbide) performance tip

How to use

Select a rotary hammer with SDS‑Max compatibility and appropriate impact energy for drilling in concrete or masonry. Fit the TURBODRILL securely into the chuck until it locks, set the tool to rotary or rotary‑percussion mode as required, and begin drilling with steady, moderate pressure. Withdraw the bit periodically to clear dust and debris, and allow the bit to cool if extended continuous drilling causes temperature rise. Use appropriate anchors or fasteners sized to the drilled hole.

Usage recommendations

Use personal protective equipment including eye protection, hearing protection and dust mask. For reinforced concrete, verify rebar position before drilling; if contact with reinforcement occurs, reduce feed pressure and use controlled operation. For best results, pair the bit with a rotary hammer that matches the recommended impact energy range for 32 mm bits and maintain the carbide tip condition by avoiding excessive bending or side load.