Drill Bit RAWLPLUG SDS+ 14 mm RT-SDSA-14/260

RAWLPLUG SDS+ 14 mm drill bit RT-SDSA-14/260 is a rotary hammer accessory designed for efficient drilling in masonry, concrete and natural stone. With a 14 mm diameter and SDS+ shank interface, the drill bit is compatible with SDS+ rotary hammers and provides consistent hole geometry for anchors, dowels and other mechanical fastenings used in construction and repair work.

Advantages

The drill bit features a precision carbide tip and a flute design that evacuates dust effectively, helping to maintain drilling speed and reduce wear. Its 14 mm diameter offers a balance between clearance for most common anchor sizes and structural strength for repeated use. Compatibility with SDS+ chucks ensures fast bit changes and secure retention during hammer drilling.

Подходит для

• Сверления крепёжных отверстий для анкерных и дюбельных соединений
• Работ по монтажу элементов на кирпиче, бетоне и камне
• Профессиональных и бытовых ремонтных и строительных задач

Key specifications

• Diameter: 14 mm
• Shank type: SDS+
• Intended materials: masonry, concrete, natural stone
• Application: rotary hammer drilling for anchors and dowels

How to use

Insert the SDS+ shank into the rotary hammer chuck until it locks. Select an appropriate drilling speed and hammer setting for concrete or masonry, then position the bit on the marked spot and start drilling with steady pressure. Periodically withdraw the bit to clear dust from the hole and allow the flutes to remove debris. Use suitable personal protective equipment such as safety glasses, hearing protection and a dust mask when drilling.

Usage recommendations

For best performance, use the drill bit with a rotary hammer that supports SDS+ shanks, match hole diameter to anchor specifications, and avoid excessive sideways pressure to prolong tip life. For deep or sustained drilling, occasionally pull the bit out to clear dust and allow the bit to cool.