LED cord 25m Rebel (1500x5050 SMD) warm white waterproof 12V

Rebel LED cord 25m with 1500x5050 SMD LEDs provides continuous warm white illumination from a 12V waterproof design. The flexible cord delivers consistent light output along its entire length and is suitable for linear installations where a protected, low-voltage source is required. Built to resist moisture, the cord can be used for accent lighting, architectural outlines, pathway edging, and signage where even, warm white light is needed.

Advantages

The LED cord offers a long 25-metre run with high-density 5050 SMD diodes that produce uniform warm white light while operating on 12V low voltage. Its waterproof construction reduces the risk of moisture-related failures and allows placement in damp or exposed locations. The flexible format enables installation along curves and edges without interrupting the light flow, and the high LED count provides smooth, continuous illumination with minimal visible hotspots.

Suitable for

• Outdoor façades and architectural contour lighting
• Pathway, terrace, and step edge illumination
• Signage backlighting and channel letter lighting
• Under-ledge, cabinet toe-kick, and cove accent lighting
• Temporary event lighting where waterproofing and flexibility are required

When it may not be suitable

This LED cord is designed for linear accent and contour applications and may not be appropriate where very high point-source brightness or focused beam control is required, such as stage spotlights or task lighting that needs concentrated illumination. Because it operates at 12V, it requires a compatible low-voltage power supply; it is not intended for direct connection to mains without a proper driver.

Key specifications

• Length: 25 metres
• LED type and density: 5050 SMD, 1500 LEDs total
• Light colour: warm white
• Operating voltage: 12 V DC
• Ingress protection: waterproof construction suitable for damp or exposed locations
• Flexible cord format for curved and linear installations

How to use

Measure and plan the installation route to ensure the 25 m cord length covers the intended area or can be joined with appropriate connectors. Use a compatible 12V DC power supply sized to handle the cord's power consumption and follow manufacturer guidance for wiring polarity and connection points. Fix the cord to the mounting surface with clips or adhesive rated for outdoor use, keeping connections and the power supply protected from direct water exposure even if the cord is waterproof. Cut only at marked cut points if a shorter length is required and seal any cut ends according to waterproofing instructions.

What to consider before purchase

• Confirm a suitable 12V DC power supply with adequate wattage is available.
• Verify installation length and whether multiple runs or connectors will be needed.
• Check mounting method and whether additional clips, channels, or sealants are required for your surface and environment.

Usage recommendations

For best results, pair the LED cord with a properly rated 12V power supply and ensure all connections are protected from immersion. When installing outdoors, route wiring to minimise exposure to direct weather and use appropriate mounting accessories to maintain even light distribution and long-term reliability.