Pipe Cutter Rems RAS CU-Inox for copper and stainless pipes 3–28 mm (Rems 113240 R)

The Rems RAS CU-Inox pipe cutter is a handheld tool designed for precise cutting of copper and stainless steel pipes with diameters from 3 to 28 mm. Its compact body and metal cutting wheel provide accurate, burr-minimised cuts suitable for plumbing, heating and HVAC installations. The tool is aimed at professional tradespeople and for on-site repair work where space is limited and reliable performance is required.

Advantages

The compact design allows operation in confined spaces while maintaining stable guidance around the pipe. A hardened cutting wheel optimised for copper and stainless steel delivers clean edges and reduces the need for secondary deburring. The simple clamp and rotate principle ensures consistent cut quality and short cycle times. Lightweight construction and ergonomic shaping reduce hand fatigue during repeated use.

Suitable for

• Cutting copper plumbing pipes
• Cutting stainless steel tubing in HVAC systems
• On-site repair and maintenance work in tight spaces
• Heating system installation and replacements

Key specifications

• Pipe diameter range: 3–28 mm
• Material compatibility: copper and stainless steel
• Tool type: handheld pipe cutter with cutting wheel
• Design: compact body for confined-space use
• Operation: manual clamp-and-rotate cutting action

How to use

Position the pipe in the cutter so the cutting wheel aligns with the desired cutting mark. Tighten the clamp until the wheel makes light contact with the pipe, then rotate the tool around the pipe, tightening slightly after several turns to maintain cutting pressure. Continue rotating and adjusting until the pipe is severed. After cutting, inspect the edge and remove any minimal burrs with a deburring tool if required.

Usage recommendations

For best results, secure the pipe to prevent movement during cutting and ensure the cutting wheel is appropriate for metal tubing. Replace the cutting wheel when signs of wear appear to maintain clean cuts. Use personal protective equipment such as gloves and eye protection when cutting metal pipes.