Alkyd enamel paint RILAK Pentaprim Cream 2.7L

RILAK Pentaprim Cream alkyd enamel paint in a 2.7 L can is formulated for protective and decorative coatings on interior and exterior surfaces. The alkyd-resin base yields a glossy, hard finish that tolerates moisture and mechanical wear, making it suitable for painted wood, metal and previously coated substrates. The product is intended for furniture, doors, trim and metalwork where a durable, easy-to-clean surface is required.

Advantages

The alkyd formulation provides good adhesion to properly prepared wood and metal and produces a smooth, uniform glossy film that resists chipping and abrasion. Its moisture tolerance and water-repellent surface make it suitable for areas exposed to occasional splashes or humidity. The paint levels well to reduce brush marks and yields consistent color and sheen after drying.

Suitable for

• Interior wooden furniture and cabinets
• Doors, window frames and trim
• Metal radiators, railings and metalwork
• Previously painted surfaces requiring refinishing

Key specifications

• Volume: 2.7 liters
• Type: alkyd enamel (glossy finish)
• Application: brush, roller or spray
• Compatible substrates: wood, metal, previously painted surfaces
• Finish characteristics: hard, wear-resistant, water-tolerant glossy film

How to use

Ensure surfaces are clean, dry and free from grease, rust and loose paint before application. For bare wood or metal, sand to a smooth surface and apply an appropriate primer if required for improved adhesion and corrosion protection. Stir the paint thoroughly before use. Apply evenly with a brush, roller or spray, maintaining recommended film thickness; allow sufficient drying time between coats according to ambient temperature and humidity. Lightly sand between coats if necessary to achieve a smooth finish.

Usage recommendations

Use in well-ventilated conditions and follow safety instructions on the container. Store cans upright in a cool, dry place away from direct heat sources. For best durability on exterior metal, combine with a suitable primer and apply two coats; on interior furniture, test on a small area to confirm adhesion and desired gloss.