Paint RILAK alkyd enamel Pentaprim Terra 2.7L — interior/exterior alkyd enamel, 2.7 L

RILAK Pentaprim Terra is a single-component alkyd enamel in a 2.7 L can formulated for durable glossy or semi-gloss finishes on interior and exterior surfaces. The alkyd-based composition provides a hard, wear-resistant topcoat suitable for wood, metal and previously painted substrates after proper surface preparation. This enamel is intended for trim, doors, furniture and metalwork where a tough, moisture-resistant finish is required and a long-lasting decorative surface is desired.

Advantages

RILAK Pentaprim Terra offers good adhesion to prepared wood and metal and forms a smooth, even film that resists abrasion and everyday wear. The alkyd binder ensures moderate flexibility while maintaining hardness, allowing the coating to withstand handling and cleaning. This product provides reliable protection against moisture and atmospheric influences when used as directed and is easy to apply with brush, roller or spray equipment appropriate for alkyd coatings.

Suitable for

• Interior and exterior trim and mouldings
• Doors and window frames
• Wooden furniture and cabinets
• Metal surfaces and metalwork (after rust removal and priming)
• Previously painted surfaces following cleaning and sanding

Key specifications

• Volume: 2.7 litres
• Type: single-component alkyd enamel
• Finish: glossy or semi-gloss (depending on shade and application)
• Substrates: wood, metal, and previously coated surfaces
• Application methods: brush, roller, spray
• Drying: surface dry and recoat times depend on temperature and ventilation

How to use

Prepare surfaces by cleaning, degreasing and removing loose or flaking paint; sand glossy or oxidised areas to promote adhesion. On bare metal, remove rust and apply an appropriate primer before using the enamel. Stir the product thoroughly before use and thin only if recommended by the manufacturer for your chosen application method. Apply evenly with a suitable brush, short-pile roller, or spray gun in thin coats to avoid runs and sagging. Allow adequate drying time between coats and condition the ambient temperature and ventilation to the product’s drying requirements.

Usage recommendations

Use personal protective equipment and ensure good ventilation during application. Store the product in a cool, frost-free place and keep the container tightly closed when not in use. Follow local disposal regulations for leftover paint and empty containers.