Alkyd enamel paint RILAK Pentaprim Yellow 0.9 L

Alkyd enamel paint RILAK Pentaprim Yellow 0.9 L is a single-component alkyd-based coating formulated for protection and decoration of wood, metal and previously painted surfaces. The product provides a durable, glossy finish with good adhesion and hiding power suitable for interior and exterior maintenance, small renovation tasks and local touch-ups. The 0.9 L pack size is convenient for repair jobs and smaller projects where a reliable alkyd enamel is required.

Advantages

This alkyd enamel offers strong adhesion to properly prepared substrates and forms a hard, glossy film resistant to moderate mechanical wear. It delivers uniform coverage and good hiding ability in a single or two-coat system, depending on surface porosity and colour contrast. The solvent-borne formulation ensures smooth application and leveling, enabling detailed finishing on trim, frames and metal fixtures.

Suitable for

• Protecting and decorating interior woodwork such as skirting boards, doors and window frames
• Coating metal surfaces like railings, gates and small metal fittings (after appropriate priming)
• Refreshing previously painted surfaces and performing spot repairs
• Small exterior maintenance and renovation where a gloss finish is desired

Key specifications

• Base type: single-component alkyd resin
• Finish: glossy
• Colour: yellow
• Volume: 0.9 L
• Application: brush, roller or spray
• Suitable substrates: wood, metal, previously painted surfaces
• Recommended system: prime (if required) and topcoat

How to use

Ensure the substrate is clean, dry and free of loose material, rust and grease. Sand glossy or rough surfaces to provide a key and remove dust before application. For new or bare metal, apply a suitable primer and allow it to dry fully. Stir the paint thoroughly before use. Apply by brush, roller or spray in thin, even coats. Allow appropriate drying time between coats as recommended by ambient conditions; darker or highly contrasting substrates may require an additional coat for full opacity. Clean tools with organic solvent after use.

Usage recommendations

Store and apply at moderate temperatures and avoid application in high humidity or direct rain. Test on a small inconspicuous area to verify adhesion and colour match when overcoating existing finishes. Follow local safety guidelines for solvent-borne paints, provide ventilation during application and allow full cure before subjecting the surface to heavy use.