Alkyd enamel paint RILAK Pentaprim Cherry 2.7 L

RILAK Pentaprim Cherry alkyd enamel paint in a 2.7 L container is a solvent-based coating formulated for protective and decorative finishing of wood, metal and previously painted surfaces. The formulation delivers a glossy, durable film with good adhesion and weather resistance suitable for both interior and exterior applications. This alkyd enamel is intended for doors, furniture, trim and metal structures where a hard, washable surface and persistent color are required.

Advantages

The alkyd binder provides a hard, resilient finish that resists abrasion and yellowing under normal conditions. Good adhesion allows application over suitably prepared timber, ferrous metal and existing coatings, reducing the need for complete surface replacement. The paint cures to a glossy surface that is easy to clean and offers reliable protection against atmospheric exposure and moderate mechanical wear. The solvent-based composition enables a smooth application and leveling for an even appearance on vertical and horizontal elements.

Suitable for

• Interior doors, window trim and skirting boards
• Painted or primed wooden furniture and cabinets
• Metal gates, railings and outdoor metal fixtures
• Previously painted surfaces requiring a restoration coat

Key specifications

• Type of paint: solvent-based alkyd enamel
• Finish: glossy
• Volume: 2.7 litres
• Application: brush, roller or spray (equipment dependent)
• Suitability: interior and exterior use
• Surface types: wood, ferrous metal and previously painted surfaces
• Properties: good adhesion, durable film, weather resistance, washable surface

How to use

Ensure surfaces are clean, dry and free from loose paint, dust, grease and rust. For wooden substrates, sand and remove dust; for metal, remove corrosion and apply a suitable primer where necessary. Stir the paint thoroughly before use. Apply evenly with a brush, roller or airless spray according to equipment recommendations and local conditions. Allow adequate drying time between coats; apply additional coats if required to achieve full coverage and desired gloss. Follow safety instructions for solvent-based coatings, including ventilation and protective equipment.

Usage recommendations

For best results, test on a small inconspicuous area first and use compatible primers on bare wood or corroded metal. Avoid application at very low temperatures or high humidity. Clean tools with appropriate solvent after use and store the product sealed in a cool, well-ventilated place away from ignition sources.