RILAK alkyd enamel paint Pentaprim light-green 0.9L

RILAK alkyd enamel paint Pentaprim light-green 0.9L is a single-component, alkyd-based coating formulated for both interior and exterior surfaces. It is designed for application on wood, metal and previously painted substrates, delivering a protective and decorative finish with good adhesion and water resistance. The product provides a durable enamel surface suitable for furniture, doors, radiators and trim where a glossy or satin appearance is desired.

Advantages

This alkyd enamel offers reliable adhesion to a variety of substrates and creates a hard, wear-resistant coating that stands up to regular use. The formulation dries to an even, light-green finish that resists moisture and provides long-term protection against minor surface damage. As a single-component system, the paint is ready to use after stirring and does not require separate mixing of components, simplifying preparation and application.

Suitable for

• Wooden furniture and cabinetry
• Exterior and interior doors and frames
• Metal surfaces such as radiators and metal trim (properly prepared)
• Previously painted surfaces that require refurbishment

Key specifications

• Base: alkyd-resin single-component enamel
• Colour: light-green
• Volume: 0.9 L
• Finish: enamel (glossy or satin depending on product version)
• Suitability: interior and exterior use
• Properties: good adhesion, water resistance, durable surface

How to use

Ensure surfaces are clean, dry and free of grease, loose paint and rust. Sand glossy or rough areas to provide a key, and remove dust before painting. Stir the paint thoroughly before application. Apply with a brush, roller or spray equipment appropriate for alkyd enamels. Allow adequate drying time between coats as indicated on the product label and apply additional coats as needed to achieve uniform coverage and the desired opacity. Use in well-ventilated areas and follow standard safety and handling precautions for solvent-based paints.

Usage recommendations

For best results on metal, remove rust and apply a suitable primer where necessary; on bare wood, use a wood primer or sealer to prevent tannin bleed and ensure an even finish. Maintain recommended drying times and cure periods before exposing painted items to heavy use or moisture.