Alkyd enamel paint RILAK Pentaprim 2.7 L — green

RILAK Pentaprim alkyd enamel paint in a 2.7 L container, green, is a solvent-based coating designed for protective and decorative finishes on prepared metal, wood and similar surfaces. The formulation delivers good adhesion and coverage, creating a durable alkyd finish suitable for both interior and exterior use where a solvent-borne alkyd enamel is preferred. The product is intended for surfaces that have been cleaned and primed as required for alkyd-based coatings.

Advantages

RILAK Pentaprim provides a hard-wearing, resilient surface with reliable adhesion to properly prepared substrates. The alkyd base offers good leveling and opacity, resulting in uniform coverage and a smooth green finish. The solvent-based composition allows application in a wide range of temperatures and gives the coating resistance to mechanical wear and common environmental influences when used according to instructions.

Suitable for

• Protective and decorative coating of metal structures, railings and fences
• Finishing and refurbishing wooden doors, frames and furniture
• Industrial and workshop equipment with prepared surfaces
• Indoor and outdoor elements where an alkyd enamel finish is required

Key specifications

• Type: solvent-based alkyd enamel
• Volume: 2.7 L
• Color: green
• Finish: durable, smooth gloss/semi-gloss (alkyd)
• Suitable substrates: metal, wood and other properly prepared surfaces
• Application methods: brush, roller or spray (adjust thinning as needed)
• Drying: touch-dry and recoatable times depend on temperature and ventilation

How to use

Ensure the surface is clean, dry and free of rust, grease or loose material; for metal, remove corrosion and apply an appropriate primer if required. Stir the paint thoroughly before use to achieve uniform consistency. Apply with a brush, roller or spray gun, observing recommended thinning and nozzle sizes for the chosen method. Allow the first coat to dry fully under recommended conditions before applying additional coats to achieve the desired opacity and film thickness. Follow safety instructions for solvent-based coatings and provide adequate ventilation during application and drying.

Usage recommendations

For best results, carry out a small test application on the intended substrate to confirm adhesion and color; use compatible primers on bare metal or weathered wood. Store the product in a cool, frost-free place and keep containers tightly closed when not in use. Dispose of unused material and empty containers in accordance with local regulations for solvent-based products.