Paint RILAK alkyd enamel Pentaprim light-blue 0.9 L

RILAK alkyd enamel Pentaprim in light-blue (0.9 L) is a solvent-based alkyd coating formulated for protective and decorative finishes on primed wood, metal and previously painted surfaces. The product forms a durable, wear-resistant film with good adhesion and is suitable for both interior and exterior applications where an alkyd finish is required. The light-blue shade provides a uniform, opaque coverage that evens out minor surface imperfections and creates a smooth, satin-to-gloss appearance depending on application thickness.

Advantages

RILAK Pentaprim alkyd enamel offers reliable adhesion to properly prepared substrates and produces a tough, long-lasting surface resistant to abrasion and household wear. The solvent-based formulation enables good flow and leveling, reducing brush and roller marks while delivering consistent color and coverage. Its compatibility with primed surfaces and previously painted coatings simplifies renovation and maintenance tasks, allowing for effective recoating without the need for waterborne system adjustments.

Suitable for

• Primed wooden elements such as frames, doors, trim and furniture
• Primed metal surfaces including radiators, gates and metal furniture
• Previously painted surfaces that accept alkyd finishes
• Interior and exterior areas where a hard-wearing alkyd enamel is required

Key specifications

• Base: solvent-based alkyd enamel
• Finish: satin to semi-gloss depending on film build
• Color: light-blue
• Volume: 0.9 L
• Recommended substrates: primed wood, primed metal, previously painted surfaces
• Properties: good adhesion, wear resistance, flow and leveling

How to use

Ensure surfaces are clean, dry and free from rust, grease, loose paint and dust. Sand glossy or uneven areas and remove sanding residues. Apply a compatible primer on bare wood or metal according to standard priming practice, and allow it to dry fully before topcoating. Stir the enamel thoroughly before use to achieve uniform color and consistency. Apply by brush, roller or spray in thin, even coats, allowing adequate drying time between coats as specified by local conditions. Avoid application at very low temperatures or high humidity to ensure proper film formation.

Usage recommendations

For best results, test the enamel on a small inconspicuous area to confirm adhesion and color match. Use appropriate personal protective equipment, provide adequate ventilation during application and drying, and follow local regulations for solvent-based product handling and disposal.