Paint RILAK alkyd enamel Pentaprim 0.9 L — blue

RILAK Pentaprim alkyd enamel in blue is a 0.9 L can of solvent-based paint designed for decorative and protective finishing. The formulation provides a hard, glossy surface with good adhesion to metal, wood and previously painted substrates. It is suitable for both interior and exterior use where a durable, wear-resistant coating is needed and offers straightforward application with brush, roller or spray equipment.

Advantages

This alkyd enamel dries to a compact, glossy film that resists abrasion and moderate mechanical stress. The formulation ensures reliable adhesion on properly prepared metal and wood and over existing coatings, reducing the need for frequent repainting. The product provides even coverage and good flow, producing a smooth, uniform finish in blue while remaining compatible with common primers and undercoats for improved durability.

Suitable for

• Protective and decorative coating of metal surfaces such as gates, railings and hardware
• Finishing wooden elements including furniture, trim and doors
• Renovation of previously painted surfaces indoors and outdoors
• Areas requiring a hard, glossy, washable finish

Key specifications

• Base: alkyd (solvent-based) enamel
• Finish: glossy
• Colour: blue
• Volume: 0.9 L
• Application methods: brush, roller, spray
• Suitable substrates: metal, wood, previously painted surfaces
• Recommended use: interior and exterior

How to use

Ensure surfaces are clean, dry and free from rust, grease and loose paint. For metal, remove rust and apply a suitable primer where required; for wood, sand and prime according to substrate porosity. Stir the enamel thoroughly before use. Apply in thin, even coats with a brush, roller or spray gun, allowing full flash-off between coats as recommended on the product label. Maintain adequate ventilation during application and drying. Clean tools with appropriate solvent after use.

Usage recommendations

For best results, test the enamel on a small area to confirm compatibility with existing coatings and desired gloss. Apply at moderate temperatures and avoid painting in high humidity or direct sunlight to reduce surface defects. When painting exterior metal, use a corrosion-inhibiting primer on bare steel for extended protection.