RILAK alkyd enamel paint PENTAPRIM 2.7L — light white, gloss alkyd-based paint for metal and wood

RILAK alkyd enamel paint PENTAPRIM 2.7L in light white is an alkyd-based gloss finish formulated for coating metal and wood surfaces. The product delivers a resilient, protective film suitable for interior and exterior applications. It adheres well to primed or properly prepared bare substrates and is intended for use on furniture, doors, radiators, metal structures and wooden joinery where a durable glossy or semi-gloss surface is required.

Advantages

This alkyd enamel provides good adhesion to both metal and wood, forming a hard-wearing surface that resists abrasion and regular handling. The formulation ensures uniform coverage and an even light white gloss that conceals minor surface imperfections. It is designed for both indoor and outdoor use, offering moisture and weather resistance typical of alkyd-based coatings. The product dries to a smooth finish that can be overcoated or maintained as a single topcoat depending on surface demands.

Suitable for

• Interior furniture and cabinets that require a hard, washable surface
• Exterior and interior doors and frames
• Radiators and heating equipment where heat-resistant finish is needed
• Metal structures, gates and railings after proper surface preparation
• Wooden joinery, trims and mouldings

Key specifications

• Type of binder: alkyd resin
• Finish: gloss (light white shade)
• Suitable substrates: metal and wood
• Volume: 2.7 litres
• Application method: brush, roller or spray
• Durability: hard-wearing, abrasion resistant finish
• Intended use: interior and exterior

How to use

Ensure surfaces are clean, dry and free from rust, grease or loose paint. For metal substrates remove corrosion and apply a suitable primer where necessary; for wood, sand smooth and apply a primer on bare or porous areas. Stir the paint thoroughly before application. Apply using a brush, short-pile roller or spray equipment in thin, even coats, allowing adequate drying time between coats as indicated by ambient temperature and humidity. Multiple coats may be applied to achieve full coverage and desired gloss. Clean tools with appropriate solvent after use and store the product in a tightly closed container.

Usage recommendations

Work in well-ventilated conditions and follow manufacturer safety guidelines. Test a small inconspicuous area first to confirm adhesion and colour match. Allow sufficient curing time before subjecting the coated surface to heavy use or washing. For exterior exposures, proper surface preparation and the use of compatible primers will extend service life.