RILAK alkyd enamel Pentaprim grey 0.9L is a solvent-based alkyd coating formulated for protective and decorative finishing of wood, metal and previously painted surfaces. The product delivers a hard, durable film with good adhesion and resistance to weathering and mechanical wear. Packaged in a compact 0.9 L container, this grey enamel is suitable for both interior and exterior applications including touch-ups, furniture restoration, window frames and metalwork where a resilient finish is required.
Advantages
The alkyd formulation provides reliable adhesion to a variety of substrates and forms a tough, gloss-to-semi-gloss surface that resists chipping and abrasion. The solvent-based chemistry ensures fast penetration and leveling, producing a uniform finish on prepared surfaces. The paint is suitable for use over appropriate primers and previously painted coats, offering good coverage and durability for repair and maintenance tasks.
Suitable for
- Touch-ups on interior and exterior painted surfaces
- Wooden furniture and trim restoration
- Window and door frames
- Metal fixtures, railings and small metalwork
- Maintenance coating over compatible primers
Key specifications
- Type: solvent-based alkyd enamel
- Color: grey
- Volume: 0.9 L
- Finish: durable, hard film (gloss level: gloss-to-semi-gloss)
- Application: brush, roller or spray
- Suitable substrates: wood, metal, previously painted surfaces
- Use: interior and exterior
How to use
Ensure surfaces are clean, dry and free of rust, grease, dust and loose paint. Sand glossy or uneven areas and remove sanding dust before application. For new or bare substrates, apply an appropriate primer compatible with alkyd coatings and allow it to dry according to manufacturer recommendations. Stir the enamel thoroughly before use. Apply by brush, roller or spray in thin, even coats; allow adequate drying time between coats. Maintain recommended ventilation when working indoors and follow solvent handling precautions.
Usage recommendations
For best durability on exterior metal and wood, use a corrosion-inhibiting or oil-based primer before applying the alkyd enamel. Avoid application at temperatures below 5°C or in high humidity. When using spray application, thin with a solvent recommended by the manufacturer and observe local safety regulations for solvent-based paints.
