Floor paint RILAK 0.9 L Beez — interior floor coating, water-based, satin finish

RILAK Floor Paint 0.9 L Beez is a water-based interior floor coating designed for finishing and protecting wooden and concrete floors. Supplied in a 0.9‑litre can, this satin-finish paint increases surface durability and wear resistance while maintaining a low odour typical of waterborne formulations. The product is suitable for domestic and light-commercial rooms such as hallways, kitchens and living areas and is intended for renovation and regular maintenance of interior floor surfaces.

Advantages

This water-based satin paint provides a protective, hard-wearing film that improves resistance to foot traffic and everyday abrasion without significantly altering the substrate texture. It dries to a satin sheen that balances appearance and practicality, and it is formulated for easy application with a brush or roller. The low-VOC, waterborne composition facilitates cleanup with water and reduces solvent odour during application and drying.

Suitable for

• Interior wooden floors and floorboards
• Concrete and cement screed floors inside buildings
• Hallways, entryways and corridors
• Kitchens, living rooms and other residential spaces
• Small renovation and maintenance projects

Key specifications

• Container volume: 0.9 litre
• Type: water-based acrylic floor paint
• Finish: satin
• Suitable substrates: wood, concrete
• Application methods: brush, roller
• Intended use: interior floors

How to use

Ensure the surface is clean, dry and free of dust, grease and loose material. Sand wooden floors lightly and remove sanding residues; repair cracks or holes in concrete prior to painting. Stir the paint thoroughly before and during use. Apply evenly with a brush or roller following the grain on wood where applicable. Allow recommended drying time between coats; apply additional coats if required to achieve uniform coverage and the desired level of protection. Clean tools with water immediately after use.

Usage recommendations

For best results, apply at moderate room temperature and humidity, and avoid painting on very cold or humid surfaces. Test the colour and adhesion on a small inconspicuous area before full application. Allow full cure time before heavy use to ensure optimal durability of the satin finish.