Floor Alkyd Enamel RILAK 0.9 L — Yellow-Brown

RILAK ALKYDENAMELFORFLOORS YELLOW-BROWN 0.9L is an alkyd-based enamel formulated for painted floor surfaces. The product offers a hard, wear-resistant finish designed for moderate foot and light wheeled traffic. Supplied in a 0.9-litre container, the enamel provides a colored protective coating intended for interior floors where a durable, glossy or semi-gloss finish is required.

Advantages

This alkyd enamel provides a hard and resilient surface that resists abrasion and mechanical wear. The formulation ensures reliable adhesion to suitably prepared mineral and wooden substrates, delivering long-lasting protection and color stability. It dries to a smooth film that is easy to clean and maintains appearance under regular use.

Suitable for

• Interior concrete and cement-screed floors
• Wooden floorboards and plywood
• Workshops, storage rooms and utility areas with moderate traffic
• Stair landings and service corridors

Key specifications

• Finish: alkyd enamel suitable for floors
• Color: yellow-brown
• Volume: 0.9 litre
• Surface performance: hard, abrasion-resistant film
• Application environment: interior use

How to use

Ensure the surface is clean, dry and free of dust, oils, loose paint and other contaminants before application. Repair cracks and level uneven areas; sand glossy or smooth surfaces to promote adhesion. Stir the enamel thoroughly before and during use to maintain uniform color and consistency. Apply with a brush, roller or suitable spray equipment in thin, even coats. Allow recommended drying time between coats as specified by the manufacturer; apply additional coats if needed to achieve full coverage and the desired film thickness. Ventilate the area while drying.

Usage recommendations

For best results, test the enamel on a small inconspicuous area to confirm adhesion and color tone. Use on interior floors only and avoid exposure to heavy mechanical loads or continuous water immersion. Maintain painted floors by regular cleaning with mild detergents and avoid aggressive solvents that may damage the alkyd finish.