Floor paint RILAK 2.7 L — brown (Kollakaspruun), water-based interior/exterior

RILAK floor paint in a 2.7 L can, colour Kollakaspruun (brown), is a water-based coating formulated for interior and exterior floor surfaces. It is suitable for wood, concrete and other common substrates used in residential and light commercial environments. The paint forms a coloured, durable film that improves surface appearance while providing protection against abrasion, moisture and everyday dirt.

Advantages

This water-based floor paint combines ease of application with fast drying and low odour, making it suitable for indoor use. The finish offers good resistance to wear and scuffing typical of foot traffic and light loads, while helping to reduce dirt penetration and moisture ingress. The brown colour (Kollakaspruun) provides an even, neutral tone that conceals minor surface imperfections and is compatible with wood and concrete textures.

Suitable for

• Wooden floors and floorboards in homes and cottages
• Concrete and screeded floors in garages, basements and utility rooms
• Porous and previously painted surfaces requiring a protective coloured layer
• Indoor and sheltered outdoor areas with light to moderate foot traffic

Key specifications

• Volume: 2.7 litres
• Type: water-based acrylic floor paint
• Finish: coloured, protective coating with matt to semi-matt appearance depending on substrate
• Colour: Kollakaspruun (brown)
• Suitable substrates: wood, concrete and common flooring materials
• Application method: brush, roller or suitable spray equipment
• Drying: touch dry within hours under normal conditions; fully cured after several days depending on ventilation and temperature

How to use

Prepare the surface by cleaning thoroughly to remove dust, grease and loose material. Sand glossy or rough wooden surfaces and fill cracks or holes as required. Ensure concrete is clean and dry; repair spalled areas and allow new concrete to cure before painting. Stir the paint well before use. Apply with a brush or roller in even coats; a thin first coat may improve adhesion on porous substrates. Allow recommended drying time between coats and apply a second coat for improved durability and uniform coverage. Follow general safety and ventilation guidelines during application and drying.

Usage recommendations

For best results on wooden floors, lightly sand and use a primer or sealer appropriate for water-based coatings on timber. On concrete, ensure the surface is dry and free from rising damp; use a concrete primer if required. Maintain painted floors by cleaning with mild detergent and avoid aggressive chemicals. Allow full curing before subjecting the floor to heavy furniture or frequent heavy traffic.