Floor alkyd enamel RILAK ALKYDENAMELFORFLOORSREDDISH-BR. 0.9 L

RILAK alkyd enamel for floors ALKYDENAMELFORFLOORSREDDISH-BR. 0.9 L is a single-component alkyd-based protective and decorative coating formulated for interior floor surfaces. Supplied in a reddish-brown shade, the enamel creates a hard, wear-resistant film that helps protect wooden, concrete or previously primed substrates in residential and light-commercial environments. The product is intended for use over suitable primers and can be applied by brush or roller to achieve a uniform finish.

Advantages

This alkyd floor enamel offers a durable and smooth finish with good adhesion to properly prepared wooden and mineral surfaces. The single-component formulation requires no on-site mixing with a separate hardener, simplifying application and maintenance. The enamel provides moderate chemical and abrasion resistance suitable for foot traffic and occasional rolling loads, while the reddish-brown color conceals minor surface imperfections and creates a consistent appearance across interior floors.

Suitable for

• Interior wooden floors and stair treads
• Concrete and cement screeds after priming
• Primed metal or previously painted floor surfaces
• Residential rooms, corridors and light-commercial spaces with normal foot traffic

Key specifications

• Volume: 0.9 L
• Binder type: alkyd resin (single-component)
• Finish: smooth, satin to semi-gloss appearance depending on film thickness
• Colour: reddish-brown
• Substrate compatibility: wood, concrete, primed metal, previously painted floors
• Application methods: brush, roller
• Drying: surface dry within hours (dependent on temperature and humidity)

How to use

Ensure surfaces are clean, dry and free of dust, grease, loose paint and other contaminants. For porous or mineral substrates, apply an appropriate primer compatible with alkyd coatings and allow full drying. Stir the enamel thoroughly before use to achieve a uniform colour and consistency. Apply by brush or roller in even coats, maintaining wet edges to avoid lap marks. Allow recommended drying time between coats; apply additional coats as needed to obtain full coverage and required film thickness. Provide adequate ventilation during application and curing.

Usage recommendations

For best performance, use on sound, well-prepared substrates and avoid application at low temperatures or very high humidity. Test adhesion and appearance on a small area if applying over existing coatings. Clean tools with mineral spirits or the solvent recommended by the manufacturer immediately after use.