Primer-enamel RILAK PROTEKSOL-50 Black 2.7L — corrosion-protective primer and finish coat

RILAK PRIMER-ENAMEL PROTEKSOL-50 Black 2.7L is a multifunctional coating that combines anticorrosive primer properties with a finishing enamel in a single product. Supplied in black, the formulation is designed for application on steel and other suitable substrates to inhibit rust formation and deliver a uniform, decorative surface. The product is intended for structural steelwork, gates, fences, radiators and general maintenance where corrosion protection and a durable painted surface are required.

Advantages

The primer-enamel provides both corrosion protection and an even topcoat in one operation, reducing total application time. Its chemistry promotes adhesion to metal surfaces and offers resistance to common atmospheric exposure. The finish is uniform and hides minor surface imperfections, while the single-coat approach lowers material consumption compared with separate primer and enamel systems.

Suitable for

• Structural steel elements and fabricated metalwork
• Gates, railings and fences
• Radiators and heating equipment (externally painted surfaces)
• Repair and maintenance painting of previously coated metal
• Small to medium metal surfaces requiring both rust inhibition and decorative finish

Key specifications

• Type: combined anticorrosive primer and finish enamel
• Color: black
• Packaging volume: 2.7 L
• Surface compatibility: steel and suitably prepared metal substrates
• Finish: opaque, uniform decorative enamel
• Application methods: brush, roller, or spray (subject to standard thinning and equipment settings)
• Drying and recoat: designed for single-coat protection; follow standard drying times before handling and recoating

How to use

Prepare the substrate by removing loose rust, scale, oil and grease; for best results, achieve a clean, dry surface with hand or power tool cleaning appropriate to the condition of the metal. Stir the product thoroughly before use to ensure homogeneity. Apply by brush, roller or spray in recommended film thicknesses, maintaining manufacturer-recommended drying intervals between coats if multiple coats are required. Ensure good ventilation during application and avoid painting at temperatures and humidity levels outside the product’s specified range. Clean tools with the solvent recommended by the coating supplier.

Usage recommendations

For long-term corrosion protection, use on soundly prepared metal and consider one full coat of PROTEKSOL-50 as a complete system for light to moderate exposure. On severely corroded or industrial exposures, combine with an appropriate surface preparation standard and consult technical data for additional rust-inhibiting primers or topcoat systems. Store the product sealed in a cool, dry place away from direct heat sources.