Floor Varnish RILAK AURLAK 0.9 L Glossy — waterborne floor finish for wood

RILAK AURLAK floor varnish in a 0.9 L glossy formulation is a waterborne finish developed for wooden floors and interior timber surfaces. The product forms a hard, transparent, high-gloss film that enhances natural wood grain while providing surface protection against everyday wear and routine cleaning. Designed for application with a brush or roller, this glossy waterborne varnish is suitable as a protective topcoat on properly prepared, dry wooden substrates and over compatible primers.

Advantages

The waterborne composition reduces odour and speeds up drying compared with conventional solventborne finishes while maintaining excellent hardness and abrasion resistance. The glossy finish increases light reflection and highlights wood texture. The varnish offers good cleanability and resistance to household wear, making maintenance straightforward. It is easy to apply with common tools and provides a uniform, durable coating when used according to surface preparation and application guidelines.

Suitable for

• Residential wooden floors in living rooms, bedrooms and hallways
• Light commercial wooden surfaces with moderate foot traffic
• Interior stair treads, skirtings and wooden trim
• Refinishing previously varnished or primed wooden floors (after proper surface preparation)

Key specifications

• Finish: high gloss
• Base: waterborne acrylic/polyurethane dispersion
• Volume: 0.9 litre
• Drying: touch dry in typical indoor conditions within hours; fully cured after recommended curing time
• Application tools: brush, roller
• Recoat time: follow manufacturer recommendations for best results
• Coverage: depends on substrate porosity and application method; typically moderate spread rate for floor varnishes

How to use

Ensure the wooden surface is clean, dry and free from dust, wax, grease and loose coatings. Sand the floor or surface to an even, open-grain profile where required and remove sanding dust thoroughly. Stir the varnish gently before use without introducing air. Apply the product evenly using a suitable brush or roller in thin coats, working along the wood grain. Allow the recommended drying time between coats and sand lightly between layers if specified by the manufacturer to ensure adhesion and smoothness. Apply the final glossy coat and allow adequate ventilation during drying and curing. Follow all safety and ventilation instructions on the product label.

Usage recommendations

For best performance, use on well-prepared, clean wood and allow full curing before placing heavy furniture or exposing the floor to frequent cleaning. Test the finish on a small area to confirm appearance and adhesion. Maintain indoor temperature and humidity within typical interior ranges during application and cure to achieve optimal film formation and gloss.